88BANSHEERIDER Posted January 26, 2009 Report Posted January 26, 2009 hey guys about to put my motor together and i bought it with a new crank and seals in it and it has a 2 into 1 carb and was wondering if there is a way to do a leakdown test on it like it is Quote
RIPPEN Posted January 26, 2009 Report Posted January 26, 2009 hey guys about to put my motor together and i bought it with a new crank and seals in it and it has a 2 into 1 carb and was wondering if there is a way to do a leakdown test on it like it is Not totaly sure what you mean, "like it is".. You mean with the 2 into 1 intake? If thats what your asking I belive the answere is sure.. Just only have to cap the exhaust ports rather than the exhaust and one intake port.. RIPPEN Quote
88BANSHEERIDER Posted January 27, 2009 Author Report Posted January 27, 2009 i was wonder how to do it i searched for it and found one for dual carbs but how would u set it up for single i didnt put the bottom end together the guy ibought it from did so i dont know if he screw anything up putting the new crank and seals in Quote
RIPPEN Posted January 27, 2009 Report Posted January 27, 2009 i was wonder how to do it i searched for it and found one for dual carbs but how would u set it up for single i didnt put the bottom end together the guy ibought it from did so i dont know if he screw anything up putting the new crank and seals in Not sure if this is the link you found or it was a different one but this is usually helpfull.. http://www.bansheehq.com/forums/index.php?...c=49835&hl= As far as a 2 into 1 vs duals there isn't much difference.. Like I said above instead of pumping pressure in one intake and plugging the other(duals) you don't have to plug up any thing besides the exhaust being that you only have the one intake on the 2 into 1.. RIPPEN Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.