88BANSHEERIDER

are 35mm dual carbs too big for my set up i have i do alot of woods and trail riding thanks matt

we should be there about 9 or so and we can meet up then if u like matt

so no one wants to go on another banshee ride at badlands

going to badlands april 2 for good friday ride. i wish i could have gone this weekend but buddys quad wasnt done so we are going this friday coming up so if any of u want to join us we will be there around 930 or so and have a few of our buddys from our local club midwestatvriders.com thanks matt

i have a 172 for a main jet and a 52 for a idle i have a 58 idle jet is that is laying around it that too big

i have a 1989 yamaha shee that has a 2into1 carb and need to know what size main jet i need and pilot i have a fmf golds k&n filter with the lid on, the bore size is around 65.5 i am 700 feet above sea level i have a problem with the the throttle from idle to about 1/4 throttle it acts like its falling on its face and has no pickup if i get off of it and hit it again it come alive i dont know if i should go down a few or up need ur guys expert opinion i can do anything else just dont know too much about jetting and could i run 34mm dual carb set up or is that too big thanks matt

so should i pass on them or should i pick them up i dont want to buy something and have a hell of time finding piston cause i havent found any yet for 70mm all of them are for 68mm blaster pistons

i have a chance to buy juggs that are stock that have a big bore cylinder in them that are bored out to 70mm for 200 dollars are they worth it and can i make them fit my cases thanks matt

i was wondering if i could run 20cc domes on it when rebuilt it last jan the compression ratio after it was broke in was around 135 would 20cc with 93 be ok or would i be on the edge i would love to run turbo blue but need to find a spot that sells it thanks matt

does anyone know about running aviation gas in these things and anyone know what octane they are

i also am running 93 in it and have a ? about running aviation fuel threw it i live close to a reserve center and have a buddy that could prob get it for me so could i run smaller domes with this or not

i also forgot to add that i have my timing set at +4 i just put that in and my pipes are fmf gold good for trail riding i read on here

i have a 89 banshee and i just pick uped a used pro design cool head for it and i am wondering what size domes i need for it. i have a 2into1 carb on it k&n airfilter fmf golds and i believe my bore size is 65 i also am 675 ft above sea level i ride alot of trails but there are some parts that i like to open it up i would also like to know what jets i am going to need to put in my main and my idle jet thanks matt

hey guys i have a 1989 shee and was wondering if i had the right jet in it, it has k&n filter with lid fmf gold pipes and 2 into 1 intake and carb going to check it tomorrow to see what jets are in it right now i live in iowa and its 700 ft asl, top end is fine and its just the low end, its doggy and sometimes if it sits and idles for a while it wants to pop on the right side until it cleans itself out wondering about that too have used the search forum and cant find anything about it thanks matt

i bought it when i bought the quad so i dont know how old it is but it has a brand new motor in it no port job just pipes and intake otherwise than that its all stock thanks matt