Jump to content

Recommended Posts

Posted

there is a little hose by the water pump hose coming out of the engine where does this hose go to and what is it ive built this thing from the ground up i cant seem to locate anything about it in the manual any ideas?

Posted
I think it is a vent that runs to the rear of the motor and blows by the back of the case.

it's a vent tuve that plugs in behind the water pump cover. 3 screws---> plug it backk in :thumbsup:

Posted

ya no big deal I bought a cover that it was plugged off so its not a big deal I would vent it since that is what they did from the factory

Posted
that little hose is your case vent. dont plug it off.

 

I just left mine about 6 inches long. But It should tee off another vent hose near the rear of the engine up by the rear mount. the 2 are supposed to tee together and vent up near the radiator/handlebars. I think thats how its installed by Yamaha. I built mine from ground up too, so mine was never hooked up.

Posted
you are correct it does tee off and tie into the other vent lines. i just have heard of guys wanting to silicone the hole closed. Imo thats not a good plan.

thanks i have a left over tube that has a tee on it that must be what its for exactly which other vent lines doed it tie to?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...