kripdiggler90 Posted December 23, 2008 Report Posted December 23, 2008 idels on right side left kicks on randomly. put throttle to 1/8 and both run.....? throttle response sucks too. 6th gear doesnt like to hit powerband, however rest are fine. 2 in 1 carb pj38 158 main jet reed spacer k&n FMF Gold Serie Impellar HD Clutch plates Quote
AKheathen Posted December 23, 2008 Report Posted December 23, 2008 idels on right side left kicks on randomly. put throttle to 1/8 and both run.....? throttle response sucks too. 6th gear doesnt like to hit powerband, however rest are fine. 2 in 1 carb pj38 158 main jet reed spacer k&n FMF Gold Serie Impellar HD Clutch plates is this a new symptom, or just put together? i would check for air leak, or a bad reed. mabey plug cap or wire. u tried new plugs right? Quote
2strokecook Posted December 23, 2008 Report Posted December 23, 2008 Make sure your carbs are in sync, or like AKheathen said check for air leak.... Quote
fastrthnu Posted December 23, 2008 Report Posted December 23, 2008 Make sure your carbs are in sync, or like AKheathen said check for air leak.... yes, sync the 2 into 1 Quote
2strokecook Posted December 23, 2008 Report Posted December 23, 2008 yes, sync the 2 into 1 sorry i didn't read that he had a two into one. excuse me. Quote
kripdiggler90 Posted December 24, 2008 Author Report Posted December 24, 2008 (edited) is this a new symptom, or just put together? i would check for air leak, or a bad reed. mabey plug cap or wire. u tried new plugs right? just rebuilt good plug caps, wire, plugs. reeds might be bad i got new rad valve but wont fit in 2 in 1 cuold i mill down the part that sticks out? but today i started it and it started reving out but only on one side at idle soon as u start to go it goes away.also only right side pipe turns gold if that means anything Edited December 24, 2008 by kripdiggler90 Quote
firebanshee Posted December 24, 2008 Report Posted December 24, 2008 just rebuilt good plug caps, wire, plugs. reeds might be bad i got new rad valve but wont fit in 2 in 1 cuold i mill down the part that sticks out? but today i started it and it started reving out but only on one side at idle soon as u start to go it goes away.also only right side pipe turns gold if that means anything Have you swapped the plug wires to see if the problem follows the wire cause it doesn't matter what wire goes on what plug.This would help you diagnose the problem. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.