the clutch adjustment

[Corndiddly5885]

hi i just got a banshee and me and my had to put it all together so we got it together started it up and started to drive it and the clutch adjustment screwed out so i had no clutch. we got it in and took off the cover screw it in as tight as it would go and started it up and it did the same thing. anyone have any ideas how to fix it?

[docjcwatson]

Sound to me like you might want to look at some adjustment at the lever. Make sure the arrows are correct on top of the cases also.

[Corndiddly5885]

well wen the clutch went out the second i tighten up the lever thinking it was to lose or something and screw come out even more. wat arrows are u talking about? i just cant picture them right now

[wayfast1500]

Same thing happened to me, the previous owner never put the lock nut or washer back on, and it backed out when I was riding=no clutch and no moving. So make sure you have that on there because it shouldnt be backing off that fast. Theres the lever where the cable connects on the top of the trans under the carbs, and a little arrow on the block. You take the cable off and turn that screw to get them to line up, then tighten the lock nut back down. The rest of the free play can be adjusted at the perch.

[Corndiddly5885]

thats it! well i dont know much about engines yet so my friend knows alot so wateva he did i went off of> and i just looked at that before u posted that and saw that there should be something on there so i looked in the manual and saw that there was a washer and nut! thanks alot

[vulvafan537240]

welcome to the hq corndiddly. very original name lol. :yelrotflmao:

[Corndiddly5885]

sure i guess lol