twinrock Posted October 16, 2008 Report Share Posted October 16, 2008 i just put myb engine together..set up is.. 4mm crank cool head 22mm domes v force 3s timming plate at plus 4deg reed spacer blocks 34mm mikuni flat slide carbs..btw this engine is in a road bike prob is that at about 4thou rpm the bike seems to pulsate.. almost turbulant like, its quite odd i never experienced it b4 if i rev straight past it its fine but 4tho is about crusing speed so its a real pain.. it doesnt miss fire or seem to be starving it just feels like it things i have tried removed the spacer blocks no different raised the clip which richened it up..it was better but still not all that good at the bike was too rich and fluffy...could it be the timming i think i will try stock timming tomorrow..anyhelp at all would br great thanks Quote Link to comment Share on other sites More sharing options...
pr0blumz Posted October 16, 2008 Report Share Posted October 16, 2008 What's your elevation, temp. and current jetting? Quote Link to comment Share on other sites More sharing options...
twinrock Posted October 16, 2008 Author Report Share Posted October 16, 2008 sea level, 22 pilot, clip second from the top 270 mains..i havnt really got around to jetting the main jet as the bike is being run in and is a lil rich bottom and mid is good and crisp plug colour good too..but just that odd resinence What's your elevation, temp. and current jetting? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.