f4istunna Posted September 18, 2008 Report Posted September 18, 2008 Had it for sale locally for a little while at $1800 firm, lots of emails and calls but no one w/ cash so decided to part it out. Thought id see if you guys could use anything before i put it on ebay. Ive bought and sold quite a few things on here in the past and always had good luck :biggrin: Id love to keep it but I have to many toys as it is and could use the $$ to repair some rental prop. I picked up. Selling my 05 Se yfz also if anyone is interested lots of new parts a/m. As for the banshee it ran and shifted great, i rode it up until the other day when i started tearing down. Topend is off, bottom still complete at the moment. 120psi at each cylinder 66mm bore wiseco piston. Can sell motor complete or in parts. Crank i believe is oem but im not 100% ill have to dbl check ( I never had this motor apart until recently, havent needed to). Good bearings no up/down slop in rod. Pro circuit platinum pipes and silencers w/ the usual discoloring up near the cylinders otherwise nice Everything on the quad works good. Stock suspension (white springs) White Plastics, gray seat. Axle and a arms straight. I have quite a few sets of spare tires/wheels im going to be selling as soon as i get a chance to go through them all. I only have pics of the quad whole at the moment, Ill get some close ups of the parts as soon as I get a chance. Heres a quick list of what i have off the top of my head. Ill make a complete list soon. All prices plus actual shipping to your zip unless marked w/ shipping. Pro circuit plat. pipes and silencers no dents ( theres one small ding if i remember right on bottom, up near cylinder has a little build up that should clean up w/ some elbow grease. $225 Cylinder w/ pistons. had 120psi before tear down. 66mm unported, overall good useable shape. $160 shipped Oem head good shape very minimal buildup on one dome $ 25 Complete bottom end good trans, clutch, flywheel, stator, sidecovers etc. Will need seal on kicker shaft soon, just started seeping out every now and again. Case broke in the usual spot No leaks, been like this since i bought it. Rode it all year no problems. $600 obo complete Will split cases if no interest whole. Stock a arms w/ tie rods straight good balljoints no tears. Will need a few of the plastic bushings where it mounts to frame (they are all there but a few have slop). A arms are blue $125 Oem rear shock adjustable, resi good charge $45 Stock swingarm blue $35 95 Frame w/ bill of sale footpeg welded on but could easily be cut off, (threads need repaired) was like this when i got it holds up great. Straight, no cracks or dents. $100 Feel free to ask for anything you dont see listed, like i said ill make a complete list w/ pics as soon as i get a chance. Thanks Quote
Keyser Soze Posted September 19, 2008 Report Posted September 19, 2008 Wow. Those are good prices. Awesome price on the frame. Quote
carlcidortiz Posted September 19, 2008 Report Posted September 19, 2008 email pics [email protected] Quote
Paddleboy Posted September 19, 2008 Report Posted September 19, 2008 do u have a case saver or pro design impeller Quote
mpwrd3 Posted September 19, 2008 Report Posted September 19, 2008 I will take the cylinders and pistons, pm sent. Quote
f4istunna Posted September 19, 2008 Author Report Posted September 19, 2008 Wow. Those are good prices. Awesome price on the frame. thanks priced to sell. I like to try and give good deals on the forums. paddleboy I dont think i have anymore case savers but ill look tomorrow, i beleive the waterpump is stock ill check that tomorrow too. carl ill get some pics to you asap mp pm replied w/ paypal info Its ashame these things have to be parted out to sell anymore. Ive been seeing them more and more on Craigslist around $1500 and under in nice shape and dont look to be selling (relists) . I Remember when non running parts bikes were more than that lol. Quote
f4istunna Posted September 19, 2008 Author Report Posted September 19, 2008 trade whole thing for 03 yamaha warrior? Need the $$ for a house, thanks for the offer though. deisel replied to your pm Quote
f4istunna Posted September 19, 2008 Author Report Posted September 19, 2008 Payment sent. Thanks a lot! Cylinders and pistons SOLD thanks mpw Will have those shipped out early this afternoon for you exhaust is pending sale Quote
dieselboost Posted September 19, 2008 Report Posted September 19, 2008 Payment sent! Cylinders and pistons SOLD thanks mpw Will have those shipped out early this afternoon for you exhaust is pending sale Quote
f4istunna Posted September 19, 2008 Author Report Posted September 19, 2008 Payment sent! Pipes Sold Thanks derek Quote
f4istunna Posted September 19, 2008 Author Report Posted September 19, 2008 I had a chance earlier today to snap some pics of parts already off. Ill get them posted as soon as i get back from dinner :biggrin: :biggrin: Quote
HAUSERSMOTORSPORTS Posted September 19, 2008 Report Posted September 19, 2008 i need the right pipe hanger and the left radiator support. Quote
f4istunna Posted September 20, 2008 Author Report Posted September 20, 2008 I tried to upload pics several times (reszed at image shack) w/ no luck. If you'd like to see pics of anything please send me your email address and ill get them to you asap Hauser How about both pipe hangers and both rad. supports $25 shipped Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.