klemet banshee Posted September 9, 2008 Report Share Posted September 9, 2008 i have a 01 banshee with fatty pipes and powercore 2 silencers, open airbox with a kn and outerwear. i have 160s in there now and it bogs wen ever it try to whoolie ahah Quote Link to comment Share on other sites More sharing options...
hercalmighty Posted September 9, 2008 Report Share Posted September 9, 2008 What carbs, what pilots, what needle and clip postion, air screw setting, what throttle position is the bogging at? Quote Link to comment Share on other sites More sharing options...
gumby6t9 Posted September 9, 2008 Report Share Posted September 9, 2008 whoolie's are bad. ahah! Quote Link to comment Share on other sites More sharing options...
hercalmighty Posted September 9, 2008 Report Share Posted September 9, 2008 Hey did you figure out your jetting yet Gumby6t9? Quote Link to comment Share on other sites More sharing options...
klemet banshee Posted September 9, 2008 Author Report Share Posted September 9, 2008 stock carbs with the tors removal caps , its 1 and a half turn out and pilot and needle i will have to check wen i get home Quote Link to comment Share on other sites More sharing options...
BellicoseBanshee Posted September 9, 2008 Report Share Posted September 9, 2008 Stock carburetors with 160 main jets! :ohmy: You are extremely lean, I am surprised the top-end has not Chernobyled yet... EDIT: With pipes and filter, you should be around 260-280 or more... Quote Link to comment Share on other sites More sharing options...
hercalmighty Posted September 9, 2008 Report Share Posted September 9, 2008 And you have 160 mains? Are you sure? You should have more like 280-320 mains. If you do have stock carbs with 160 mains you have some problems. Check and make sure you dont have Keihin jets in there. Quote Link to comment Share on other sites More sharing options...
mdhc500 Posted September 9, 2008 Report Share Posted September 9, 2008 (edited) If those are stock Mikuni carbs and you DO have 160's in them somthing is BAD wrong... I cant believe it still runs if this is the case... Thats about 10-12 sizes to lean bro... No fuckin wonder you cant whoolie! Edited September 9, 2008 by mdhc500 Quote Link to comment Share on other sites More sharing options...
gumby6t9 Posted September 9, 2008 Report Share Posted September 9, 2008 Hey did you figure out your jetting yet Gumby6t9? I raised the needle one notch and it cured the problem. (Well it hasn't occured again... yet!) Quote Link to comment Share on other sites More sharing options...
Paddleboy Posted September 9, 2008 Report Share Posted September 9, 2008 same set up but with pods and 600ft. i have 340mains 25 pilot needle in middle clip and air screw 2 out. i am a little rich so i'm going to drop my mains down to 330 Quote Link to comment Share on other sites More sharing options...
klemet banshee Posted September 11, 2008 Author Report Share Posted September 11, 2008 sorry guys i looked at them wrong ahahaha they are 260 Quote Link to comment Share on other sites More sharing options...
mopar1rules Posted September 13, 2008 Report Share Posted September 13, 2008 throw in some 280's or like 300's then and try that Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.