Search the Community
Showing results for tags 'coolant'.
Found 4 results
im looking for some help, or even someone that works on banshees in the iowa area. My banshee all of a sudden started reving high. So i gave her a break. Started it up and it instantly starting reving high, and the rpms increase very quickly, only can keep her on for like 20 seconds. Its bad. I checked my airscrews, my i take boots. My carbs were synced a week ago, and seemed to be on point. Might be leaking coolant somewhere. Underneath my banshee on the clutch side, theres a bolt that seems to have coolant/oil on it. I dont know whats going on. Can somebody help me?
banshee winter rebuild
laporta682 posted a topic in Banshee Repairs and Modshi, I finally have the money to get my shee back in action, she was disabled over the summer when my 16 year old brother decided to stab all 4 tires and my radiatior and I haven't had the money to fix it until now... mods on her are bored .20 over fresh wiseco top end, 4 mill stroker crank, ported, full toomey t-5's.. before all the damage that occurred she would overheat and piss coolant quite often... I'm guessing because of the oem cooling on the modded engine so I've been looking into eBay oversized radiators and billet coolant impellers... what are you guys running for Cooling system components with similar mods to me and how do you feel about the eBay oversized radiatiors? thanks!
sandmann posted a topic in Banshee Repairs and ModsMy banshee has been driving me crazy for a while now. Its been overheating after running for about 30 minutes in the sand. The coolant gets very hot and starts going out the overflow valve on top of the radiator and drips down on the exhaust through the connected hose. To try and solve the issue I did the following: 1- installed new head gasket (installed properly with 20 lb.ft of torque) 2- installed new radiator cap 3- installed new water pump propeller (stock) 4- flushed cooling system and used new coolant 5- changed gear oil 6- tried different fuel mixes All the above did not change anything. Banshee still overheats and coolant starts shooting out the overflow valve. Other than the overheat, the banshee works perfectly and starts from first kick. My banshee is a 2004 100% stock, no modifications what so ever. Its very well maintained. I need some professional help guys!
radiator hose routing
sandmann posted a topic in Banshee Repairs and ModsGuys I need your help on this one. I bought a 2004 used banshee last month. I tested it on the sand dunes and the coolant reservoir had to be refilled twice every hour. I removed the air intake box and the gas tank to see if there are any loose hoses and I found a hose dangling besides the rear shock. I traced it back to a "T" right between the carbs and continues to the radiator. My question is, is it supposed to be going somewhere or is it just an overflow? I doubt it is just an overflow hose because I noticed a clip at the end which means it should be hooked somewhere, but where?