Search the Community
Showing results for tags 'Misfire'.
Ok, I got a banshee that wouldn’t start. what I have done since: cleaned carbs completely, adjusting floats, adjusted carb screws to stock, removed old fuel and blew out fuel lines, checked/cleaned reeds, changed spark plugs, compression tested 125psi each side. It will start only with the help of starting fluid, no idle, misfires from right cylinder. It came with a cool head, fmf pipes and what looks to be a tors delete carb setup installed. Also received box of miscellaneous old parts including cdi box and stator...I’m guessing previous owner had some kind of issue with this. attached is video of bike running and missing ANY help would be great! I will switch plug wires to see if mis goes to other cylinder and check to see if the brain was disconnected. Any other thoughts? I guess the video is larger than 0.5kb. Will try to reduce size and post that
I have a problem fellow Banshee owners. I have had my Banshee for about 6 months now. About two weeks ago I hopped on it and took off for a little ride and it was only getting hot on the left side. I could actually put my hand on the right side for a few seconds before it felt warm. I have cleaned the carbs, installed a new coil, changed the Main jets to 300. The pilot jets are 30s. It still has the factory tops to the carbs but the TORS is unplugged. The carbs have been synced, cleaned. The compression on both sides is 120. I have taken the stator apart and cleaned it and inspected it. I have not checked the black ox behind the seat. At first it started as a plug fouling issue I am pretty sure. Then this started to happen.