BansheeBrian

I have tried a 15 tooth and It make the shee so freakin jumpy. The thing lunges hard when it hits powerband. I like the 13 for hillshooting for the stronger 3rd gear top end. First gear seems like a waste of time with a 13 tooth. Wonder what a 16 tooth will do to 2nd gear?Hmmmmm. Streachhhhhhh.

Sounds like a good deal. Sounds like jetting can be a real pain at glamis. Once your dialed in just right the freakin sun decides to go down and lean you out. Very impressed with the air box mod.

Noss Machine is the way to go for raising compression,more efficient cooling,and increasing looks of your shee.

It's good to meet girl in park but better to park meat in girl.

How about quad only pics?

The aftermarket ones are just lighter and better looking than the stocker.

I hope youre enjoying your own topic.

when a 4 stoke blows its top how much money is spent and how much time is used on the repair? Nuff' said.

The 450 was keeping up with piped only shee at the pit races last weekend. When they got cocky they tried to step to me or the other moderate to high modded shees he got pelted with rocks after 100ft. Only a banshee can beat a banshee.cut n'dry,plain and simple. Pipe shee and the 450 is a good go.

My axle was loose and the pads were ground to nothing. Need both and i dont care what make.

At Ronnies: Idle kit is 34.75 which is tap and two idle screws. TORS removal is the 51.50. comes with tops and cable.

Connecticut is already brim full of 2&4 stroke toy hating bastards. Our state would just love to ban everything that has to do with fun. Hopefully there will be a change from the dictatorship were subjected to now. The next governor will ride in on a 535 p.v and then we will know that we are free men. Mass. has already put a ban on 2 stroke sales next year.

One of the great mods to have! Hell.. I found one in the grill section of K-mart for 6.00.

Could be your coil or your brainbox(cdi). The only way to know for sure is if you can swap a coil or a stock cdi.Check out whats going on inside your stator cover.If its rusty in there you may have a prob.

"the stranger" when your masterbating with one hand and you sit on the other.then when the hand youre sitting on falls asleep....switch hands!!

Thanks for the laughs!!

I am anxious to see how you new product will work!

Firts of all they look great. You dont have to change the head studs. There are a gasket free head. The domes are interchangable with pro design. Compression is up to you.If your crank is welded you can go higher than 160psi per cylinder.If your crank is stock stay under 160psi. I just noticed you have Pro-Circuits.So do i and the Noss head will greatly improve your bottom end. I found the head wipes out that on/off lightswich powerband the pipes cause. PC's and the Noss head are a great combo. Try it and see for yourself!

Ronnies Mail Order in Mass. sells them for 51.50. It's 10% off alot of stuff there right now.

I am also curious as to who this dude is. If you look over his feedback it seems like he is a jack-of-all trades.I was tempted to contact him and see what the deal is but something told me not to. Nice rates for a port and bore if you ask me.I'm not too anxious on shipping my jugs to someone that isnt reputable.

This maggot is a problem. I have not recieved any return e-mails from our friend. How many of you have sent this dude an e-mail or something? If not let him know how wrong he is for this bullshit.

Ladies and gentleman i just got the biggest brain fart ever when i was working on the carrier. I am done performing BenBB's idea of grease zerks. There are two seals for the bearings and i forgot which one goes to the sprocket side and which goes to the disc side. One has a fatter seal inside and the other, smaller. Now that my keyboard is messed with artillary grease can someone help out on this bearing seal mystery?

thats freakin' mindblowing!

Nice work for all that fixed this little thief I shot him an e-mail and there was no response.It was explaining the indecency of what he was doing and to terminate the sale of someone elses works. The voice of one is never heard but the voice of many is deafening. Again, great job!!!!!!!

Yamaha warrior has my vote. you can slowly wheelie that thing from A to B without a hitch.