pro line

Will stock back wheel hubs fit on a warrior?

do you guys know if the 4-156 bolt pattern will fit a blaster?

What is the size of a stock front rim on a 97 shee. thanks

anything that has "beer" or "lager" or "stout" in the title.

I've been trying to figure this out for awhile and can't do it. When i get on it, the first 3/4 of throtle of every gear its fine, but when i open it up to the final 1/4 it boggs like hell. I've had no problems with my setup until now. I have checked the main jets (175-205), air screws (.5 turns-2 turns), compression (170-175), air leaks, and head o-rings. From those i cant figure out whats wrong. the only reason i havent changed the pilot and needle is that i have ran this exact setup in the same weather last year and it was fine. cool head (19cc domes) t-5's v-force reads 28 keihns w/clamp ons dune port boost bottle (just kidding) advance timing +4 thanks for all the help a head of time

I was thinking about getting a set but I wasent sure if you need a lock out clutch and over-ride tranny when you are pushing that much hp. If anyone knows, let me know.

I'm in for opening day and Silverfest.

tommy boy

i used to manage a reaturaut and whenever i dated a waitress it turned out real bad. My advise is try to change schedule or get her out of it some how. good luck

A man has been drinking at the bar all night. Around 2am the barteder tells the man he has to go. So the man gets up from his bar stool and BLAM! He falls on his face. He thinks to himself, man I am messed up, I'll just crawl to the door and get up. He gets to the door and pulls himself up and BLAM, falls again. I don't think I have ever been this drunk, I'll just crawl to my car and drive home. When he gets tot he door BLAM falls again. Well I'm too drunk to drive so I'll just crawl home so I can get some sleep. The man crawls all the way home and when he gets to his front door he tries to get up and falls again. Man I'm just going to crawl upstairs and sleep this off. The next morning his wife starts screeming at him, "get up you worthless bag of s@#$, you where out drinking at the bar last night weren't you?" The man replies "how did you know?" His wife replies "because the bar called and sayed you left your wheelchair at the bar again".

Its pretty big. Covers about 6-8 sq miles with quite a few people.

Lemme me know the detais. l I live in Macomb Township which is right next door. I'll see what I can do.

Would you guys buy this for $1700? I think i might get it and was curious of what everybody thought of it. http://cgi.ebay.com/ebaymotors/ws/eBayISAP...TRK%3AMEWA%3AIT

#315

those games are great!!!!

i had the same thing happen to mine and a heavy duty press couldn't get it out. I ended up doing alot of cutting and and drilling. Just make sure you greese the hell out of everything when you put it back together. I haven't had a problem in 3 years. Good luck I hope it works out.

The problem started before i sheared my key (+4) I now have a new one on. I havent checked the gap on my coil since i replcaed the key. I also havent messed with my ignition in years. I run both 110 octane and alky and had the same problem with both. Thanks for the help guys I'll check that gap as soon as i can and if anyone else has any ideas im open for anyhting.

Last trip to the dunes the shee wasent running right. Due to work I havent had a chance to look at it until recently. The problem is its top end is a dog and is missing bad. I don't think it a jetting problem because it does the same thing with my alky carbs and I have had both sets dialed in for a while now. I have checked the comperession and both sides are 165. I'm lost right now and any help would be great.

This may sound bad but it gets me goin. Called a "butter royal" half butter scotch shnapps half crown royal When I was bartending i think i made about 6 different drinks all the same and we always joked when in doubt make it red. The thing is nobody could tell the difference.

I live right near Magic and they usually always have what you need in stock and if they don't they will get it quick. Just some advise, if you ever need questions answered talk to one of the owners (can't remember their names). The other guys know real basic stuff but not much more.

that place is great. I went to gulf shores one spring break and we snuck in and it was the biggest hole in the wall hillbilly bar ive ever been to. Let just say we stuck out like sore thumbs. it was awsome, right up my alley.

Best Christmas movie ever - Christmas Vacation How about this "I was just checking the specs on the rotary gerter up there.......... I'm retarted"

I have no clue what an override tranny does for a banshee. If you guys could fill me in with all the details that would be great.

ill be there. Lets get a set date.

ive got one, used one season, i will get back with you with some pics. lemme know how much you want to pay for it.