Jump to content

JG1

Members
 View Profile  See their activity

  • Posts

    262

  • Joined

  • Last visited

  • Days Won

    3

 Content Type 

Posts posted by JG1

  1. Air Filters

    in Banshee Repairs and Mods

    Posted

    I was playing around with the light switch while the bike was running. The lights on the left side seem to work intermittently as I'm switching between low and high. The lights on the right aren't coming on at all.

    Does that mean anything in particular?



    Sent from my SM-G960U using Tapatalk

  2. Air Filters

    in Banshee Repairs and Mods

    Posted

    So, I haven't been able to run the bike yet. Looks like next week I'll be able to.

    Not sure if this is normal, but when the bike has been sitting for a while, it takes quite a few kicks to start it?

    When the bike has been running and its shut off, one kick will start it back up.

    Sent from my SM-G960U using Tapatalk

  4. Air Filters

    in Banshee Repairs and Mods

    Posted

    22 hours ago, kawa110 said:

    Support frame with rear wheels off ground, supports swingarm, Take the upper shock bolt off and be done with it.


    Sent from my iPhone using Tapatalk

    So, pretty much how I had it? 

    Upper shock bolt meaning the upper link? Or the actual upper shock bolt?

  5. Air Filters

    in Banshee Repairs and Mods

    Posted

    I jacked the bike up, and put a milk crate under the axle and slowly lowered the bike just until the axle touched the crate. I pulled the nut off the bolt on the upper link. I stopped there. I was trying to tap the bolt out of the linkage, but it's so tight that I'm envisioning the bike buckling at the swingarm pivot when I back the bolt out all the way.

    Sent from my SM-G960U using Tapatalk

  7. Air Filters

    in Banshee Repairs and Mods

    Posted

    I've been staring at this dog bone I picked up a little while ago. Figured I'd go out back and install it today. I jacked the bike up, and slid a crate under the rear axle to hold the swingarm in place.

    Should I remove anything off the bike before start pulling the bolts off the linkage? This particular bolt doesn't look that easy to access. Any tricks to doing this? Maybe I'm making it more difficult than it needs to be. 4168a4bb582abc2e3568b24230575b4e.jpgc71f0986ef40e94f1c5bc18aba6d07bb.jpg

    Sent from my SM-G960U using Tapatalk

  12. Air Filters

    in Banshee Repairs and Mods

    Posted

    1 minute ago, 375hp banshees said:

    Umm... The topic is air filters

    The LEDs work?

    Sent from my XT1585 using Tapatalk
     

    That was a LONG time ago. Thread has evolved since then. Lol

    LEDs not working. I guess I’m going to have to dive a little deeper into this. 

  17. Air Filters

    in Banshee Repairs and Mods

    Posted · Edited by JG1

    47 minutes ago, 375hp banshees said:

    Iirc, you usually have to do a little bit of triming. ( Might be for stock covers tho... Just don't freak out if it doesn't fit perfectly.

    FYI also, they sell different ones for a different sprocket size ranges. so before you trim, make sure you got the right one

     

    Sent from my XT1585 using Tapatalk

     

     

     

    Thanks. Good to know. 

     

    Cant be any worse than these plastics. 

    I got the small sprocket case saver (12-15). 

BHQ Quick Links

×
×
  • Create New...