jimmy2450

Aight boys i raised the needle one notch im at the last one now starts fine but whe i give gas delay of 3 sec before it goes back to idle so looks lean and problem is still there, i noticed for the second time that my rad was missing about 10 once of coolant and overflow bottle his full i ran the shee at 15% throttle and im seing some bubling im thinking might be the coolhead o ring that are damaged on the right side , i dont see any sign of coolant on plug ! Whats weird his when i snap the throttle both cylinder are normal

I will try the needle this afternoon i live in quebec canada bought the shee a month ago it was maybee -5 and now we are at -15 average i had a banshee 10 years ago with less mod i am not new to this world and i have a good mechanical back ground this problem is weird oh and i noticed that the jug have been ported when i reoved the intake yesterday

what would raising the needle would affect ? its weird because engine starts good runs good tons of power but going slowly on throttle turns off progressivly the right jug

i have try everything that i know of when i accelerate slowly with steady throttle right jug just stop firing, it happen at about 25% throttle and stays unless i yank the throtle then it fire back up ,if i just gun it all the time it wont happen, what i tried i switch spark plug cable , clean and switch read valve, and i am running a trinity stage 4 pwk 38 airstriker single carb, what could be causing this ????