Just purchased a 2006 banshee this spring. Was pretty much all stock besides the pipes and reeds. Decided to start upgrading. Bought some new Douglas beadlock rims, Maxxis tires, and Alba +2 A-arms.
I installed the A-arms, rims, tires and everything went together pretty smoothly. My issue is when I went to do the front end alignment. First off the quad pulls to the left super hard. As soon as I let my hands off of the bars it darts straight left. I started off by using a stringline off of the rear tires for the alignment. I set the camber at a -1 and the toe-in at 1/16"-1/8". The problem that I'm finding is that there is about a 1" difference from the right side front tires and the left side front tires in relationship to the rear tires. I have tried countless different measurements to try and figure out what is causing this. I even went ahead and bought a new Tusk extended axle in hopes that the stock axle was jacked up. I replaced the carrier bearings as well. I also replaced the stock handlebars thinking that they were bent possibly. So far nothing has helped. Any suggestions or ideas would be greatly appreciated. I'll try and attach some pictures to help show what is going on.....
Thanks in advance.