jeremyshee

Hell, here in Pa that would have pulled 3500 all day Sent from my VS425PP using Tapatalk

Where r u located Sent from my VS425PP using Tapatalk

That's awesome man, thanks. Definitely will do. I'm fucking excited now. Being able to make a call n have all the guess work done already is fuckin sweet. Sent from my VS425PP using Tapatalk

Like as far as tranny mods, porting type, which bearings on the crank, etc. Will redline tune the motor like fast does? I tuned my first 4mil this summer, first besides basically stock shees, and it was a headache. Sent from my VS425PP using Tapatalk

Well I have lonestar plus 1 plus 2's and elka 3's already too. Just didn't know if other shocks were more ideal, same with the arms. Going to 6 grand would b do-able. On the motor I wanna make sure I got everyone's advice in line before I call redline so I can tell them exactly what I want. Sent from my VS425PP using Tapatalk

Yes. There is a few competitions where there's hills like on the videos on banshee hq but not many. Mostly less steep hills n first one wins till its narrowed down one Sent from my VS425PP using Tapatalk

I'm 170, could spend about 5 on the motor (already have 10mil crank)(billet) and maybe 3 on the chassis. Sent from my VS425PP using Tapatalk

Anyway I share could use some info on a hillclimb racing (3 wide) build. Would like a 10mil, need to know what type of porting, pipes, carbs, suspension, swing arm and anything else. Some knowledgeable people gave some good advice already but more is always welcome. They say u know your shit when it comes to hillshooting Sent from my VS425PP using Tapatalk

Were you at a place called ski sawmill in pa last weekend? Sent from my VS425PP using Tapatalk

Ill look him up on here, thanks. And ill take no offense, i laugh my ass off regularly on here from the comments, mostly cause fucktards ask for advise then don't take it. There's a few like special 06 and aeusully, that have helped a lot in the past and continued to do so. I take everyone advise and always am open to more Sent from my VS425PP using Tapatalk

I'm up for trying new stuff, actually saw quite a few others are using fireball stuff. Sent from my VS425PP using Tapatalk

Also i always have bought lonestar stuff. Is there a cheaper option without sacrificing quality as far as swingarm? And would u cut every other row off the ambushes? Sent from my VS425PP using Tapatalk

Sweet, thanks man. Answered my next question, redline it is. Fox sounds good too, don't really care a whole lot for my elkas, it was just a price was right thing. Hope it turns out good, saw what a few others 10mil cubs cost them. This will b it for me for a while. Sent from my VS425PP using Tapatalk

So went to watch some hillclimb racing this past weekend here in pa n would love to try it next year. Only like 4 banshees there against 30 450's, only one shee worth a damn but blew up. Anyway, not gonna be hard core hillshooter, would like to try a 10 mill (never have). Need to know what type of porting, ideal length of swingarm, will b done on dirt so tire type, just spent a ton on elkas for my other shee but what I need there too. Yes this is serious, fuckin hate those four pokes killing shit, ill spend whatever. Would like to get a builder going on the motor while I wait on suspension and swing arm. Any advice is appreciated Sent from my VS425PP using Tapatalk

gonna try cutting a relief special06shee, just hope I don't fuck up the threads

soaked it over night in pb, took the bolt that I had a nut welded to(grade 8 bolt), put the impact to it and it twisted that fucking bolt around without budging a fucking bit. you have no idea how fucking pissed I am. if there was a frame that I could have in few days id buy it and smash this p.o.s. to pieces

tried it. then took a nut that fit down in it , welded a bolt to that nut and tried turning the holder out. fuckin thing wouldn't move. they don't have reverse threads or anything do they?

have any of you guys tried getting this god forsaken thing out? ive tried everything, including heating it with no luck. all im waiting on for my rebuild is powdercoating my frame and I need this damn thing out. ANY help is appreciated.

thanks guys, great help as always. cant wait till this thing is done. so many little things to improve that it seems as if it will never end.

is there any real benefit to these other than appearance?

ffs, smh. I don't know if your completely stupid but it's apparent your uneducated when it comes to these things. You get what you pay for. I didnt have a time limit either, just wanted it right away rather than waiting. I too have something else to ride, just love banshees. And no didn't buy it. Sent from my SCH-I535 using Tapatalk

Did you buy it all at once? It didn't matter where the money came from to me. Bought a banshee, did a little too the motor and then found banshee hq and thought "fuck this, mine is a pos compared to these machines" and took the quickest way to change that without spending money that was needed for other things. Sent from my SCH-I535 using Tapatalk

stupid? no, didn't wanna ride a half ass piece of shit. whats stupid about that? how in the hell else is someone supposed to build a nice shee? like I said before I wish I would have known about redline before I made a hasty decision on my vitos motor; not that it wont rip good or anything but don't have the money for a 4 grand motor if I don't like what I have. so 2500 into the motor with add ons to go with it (v-force4's, timing plate, 28mm pwk), 2700 to lonestar for a arms, axel, swingarm and elka 3's with brake lines clamps ect, new plastics and hardware. fucking thing is pretty much all brand new (well when its all put together). tell me in your opinion whats stupid about that.

No, see she's gonna ride it and say the hell with that and get something different. Then I'll b "stuck" with two built banshees lol. Didn't go well at the bank the other day. Took a loan out for 2010 f 150 and then 6000 to build my banshee and now they won't give me a penny more. Hoping the taxes get back SOON but if your aake to sell it before go ahead. I'd be lying if I said I hope it does though lol. Sent from my SCH-I535 using Tapatalk

should be able to pm you within 2 to 2 1/2 weeks and set up a date and time to come see it. but of course if you can sell it in the meantime go ahead, first come first serve lol. would be awesome to have though. or for her to have I have to say lmao