rustygold1

Hey i would really appreciate if someone could give me advice on how to jet my banshee/type of needle to use for my circumstances. All info is below. My main goal is longevity, should have plenty of power through this setup. not sure how to mix fuel, thinking 32:1. Open to opinions! 1) What type of aftermarket exhaust do you have? Toomey T5 w silencers 2) What type of airfilter do you have? Toomey 2-1 with outerwear 3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all No airbox^ 4) What is your elevation? (If you don't know, go here: http://www.topozone.com ) 1580ft 5) What size pilot jets are you using? STOCK 6) What size main jets are you using? STOCK 7) What temperature is your Banshee jetted for? 60-80 F through summer. also will be riding in spring/fall 10-35 and in between each 35-60 8) Do you have a port job? Dune port Mccoy 9) What kind of carbs? STOCK 10) What size carbs? -26mm STOCK

Lookin to purchase a +4 swing arm. Also lookin for a wider axle. Pm me what you have got for sale ill get right back to you! Shipping to north dakota paypal ready!

Lookin for a 6 pack rack! Pm me if youve got paypal ready and shipping to north dakota

It would be nice but I live in Saskatchewan canada and there is not many to be found. For way less then 3000 im sure I can put a motor in a frame and cover the minor things. Im guessing ill be done with preformance parts for 2g

I am looking for a bottom end for my banshee. do not need tranny gears, or main cases as I have a few some sitting around. But I would prefer a complete bottom end. will buy chain wacked! Will buy needing work or ready to run. Let me know what you have got and ill make you an offer. shipped to north dakota paypal ready experience shipping!

TTT hopefully making a deal but looking if I can get a better price elsewear possibly

Lookin for mid-high reeds for my shee. Dont need cage really. Just want good set of reeds! Vforce 3 or 4, anything really pm me with what youve got

I will take the air filter I will text you tomorow mourning (1)306-231-5007

looking for a top end setup for sale Need pistons, cylinders, head. Want a ported stock stroke or 4mm ready setup. Will consider a less preformance setup for a good price. Will also buy crank! Stock or 4mm paypal ready and experience shipping needs sent to North Dakota

Looking for a used 2-1 toomey air filter setup for my banshee!also a 6 pack rear rack. Paypal ready

I gave um a text thanks! Hopefully I can find something cheaper though

What bore??

Check park break my friend had it happen to him the sensor was stuck on I guess and it wouldnt spark on 1 cyl

I may be interested email paintball-in@hotmail.com please

Hello I need all the wiring for a banshee.Everything for ignition, Headlight, dont need brake lights. Would need shipped to North dakota unless in westerm canada paypal ready, experience buying and shipping!

Shee421alky I see you replied to 2 of my wanted ads for a crank and pistons is there any way I can email, text or PM you on were you're located and some more parts? My email is paintball-in@hotmail.com

No I bought a banshee with basically no drivetrain. A rolling chassis wthout aarms haha. Tryin to gather parts for spring! Also interested in buyin a parts bike and gettin it shipped up

looking for handle bars for a banshee. stock or renthal or whatever. also need all controls like on/off, clutch, throttle (twist or thumb), hand grips. would need shipped to North Dakota unless in western Canada Experience shipping and PayPal ready!

lookin for stock sized carb boots. nothing special long as there in decent shape! would need shipped to North Dakota unless in Western Canada experience shipping and PayPal ready!

lookin to buy a used cylinder and piston kit. will buy fresh boared with new piston/rings or used would need shipped to North Dakota unless in westen Canada experience buying and shipping, PayPal ready!

looking for Toomey or CPI pipes. Not big boar. would need shipped to North Dakota, unless they are from western Canada experience buying/shipping and PayPal ready!

Looking for a crank for my banshee. Stock, welded, or 4mm. Would need shipped to North Dakota or would buy straight from western canada. PayPal ready!

I just bought a banshee torn apart and am looking for a nice colour scheme. The plastics are like new (uncut) but they are blue, not many options for colours that go good with blue. Looking for any unique eye catching also like a clean look, but the pic below is the only one on images that caught my eye. the seat is black with grey rear corner. Would get a powdercoated frame, rear end, A-arms, hubs, ect. if i went with the green. So what have you guys done for colour schemes with blue plastics to make it look unique?

Interested in bolth crank and cpis do you have silencers? Does crank need anything? Location and shipping To ND?