Jump to content

rustygold1

Members
  • Posts

    47
  • Joined

  • Last visited

Everything posted by rustygold1

  1. Dave, those jugs would work with stroker/long rod?
  2. I only need the cyls and maybe pistons the rest of my motors good but thanks for offer. I doubt u wana sell ur jugs alone
  3. Looking for +4mm stroke long rod (115) ported cylinders to use with cut head. Or aftermarket full top end kit. Used or new! Comment and pm me ill consider anything
  4. -all rad hoses (including small one that goes on top the head) but dont need the one that goes from head to under reeds -aftermarket bars and grips -Front fender supports -All Engine mount bolts -shifter -engine cover for water pump -1 expansion Chamber rubber hanger -3 rubber headlight mounts -carb boots connector (factory "boostbottle
  5. Hello, my friend and I are in the process of building a YZ490 TRI-Z trike and need some help. He purchased the trike with a trashed motor, and bought an incomplete 1987 YZ490 dirtbike from a wrecker for the budget build. We have the motor bolted into frame, but have run into some issues with making it all work together. The first problem we ran into was exhaust, our bike came with no exhaust and we will need to cut up a pipe, or try to build mounts to make it work with our frame. We are asking if anyone has a stock (or maybe aftermarket) pipe they would be willing to get rid of to help with the build, as we cant find any for sale. Also, we need stator, flywheel and flywheel cover as they were pulled off at the wrecker. One other fitment issue were wondering about is the Carb and filter. Lastly, we need advice on the build and are wondering if anyone else out there has done the same thing or similare! Thanks alot! PS. I know this is not banshee specific but definitely a worthwhile Yamaha build.
  6. Lookin for used banshee silencers. In most condition, not stock though. To be used with paul turner mids and highs Paypal ready Shipped to north dakota
  7. Lookin for a set of Paul Turner mid or high range pipes for sale. Will also buy just the silencers. In rough shape or not, as long as they arent dented up tk badly. shipped to North Dakota PAYPAL ready!
  8. what if i were to use a ported 4mm setup? how much bigger would i have to go?
  9. Banshee400nut I sent u an email recently man lets make a deal
  10. I am looking for a preformance top end to use with a stock stroke. Will look at cub cylinders, ported cylinders , ect. Anything with good relaibility and preformance. Also lookin for Pipes! Toomey t5, paul tuners, cpi Preffered. PM me and we an try to work out a deal paypal ready and experience shipping Shipped to North Dakota unless in canada (huge plus)
  11. I am looking for a preformance top end to use with a stock stroke. Will look at cub cylinders, ported cylinders , ect. Anything with good relaibility and preformance. Also lookin for Pipes! Toomey t5, paul tuners, cpi Preffered. PM me and we an try to work out a deal paypal ready and experience shipping Shipped to North Dakota unless in canada (huge plus)
  12. Why woulf I get pods these filters flow awesome and I drive tons of dirt roads. And you don't reccomend the toomey needles?
  13. searchin searchin for parts

×
×
  • Create New...