887ru

I sent him A 90hp motor To find more power and rebuild, I didn't have him start from scratch. I Never called Yelling at anyone that's crazy, Ms. Kimmer called me and we had a 20 min Convo on how she was sorry & My money would be returned. She got my address and shipped the motor over that same phone call. That's the one and only time I spoke with Nate and kimmer.

$350 Worth of Rags I guess 🤔

He told me it was in the Dyno chassis for 4 months then said the tune would never be right due to elevation difference & Carbs not flowing right on his bench. That's when I said SEND MY MOTOR. I'm trying to figure out when was he going to tell me I wasn't getting money he promised to return?

I would how it runs Great I paid for Porting on top of the rebuild and Dyno fees. Point is Why do I have to pay extra then get spent around for months?

Motor has sat needing the Dyno tune But looks like I'll be paying Twice to have it dyno'd Once 🤔

Im not looking for anything to "HELP MY CASE" NATE AT KAN POWERSPORTS WAS PAID TO DYNO THE MOTOR, HE DIDN'T DYNO THE MOTOR, NATE SENT THE MOTOR BACK COMPLETED AND TOLD US GIVE HIM TIME TO RETURN THE MONEY FROM THE DYNO FEES. HE NEVER OPENED ANOTHER FACEBOOK MESSAGE FROM US AFTER THAT. HE ONLY CHOOSES TO REPLY ON POST WITH EXCUSES LIKE I DIDN'T PAY HIM FOR THE JOB AT HAND.

That's because the post had nothing to do about the caliber of Work done, Just the money I paid for the Dyno run that wasn't returned with the motor. Then the fact he ignores me for 3 months after telling me he would send me my money says alot. People Should know how he conducts Business.

Everything was Paid + Extra. I have the invoices of every dollar in front of me. Total without shipping was $2,340.35. I Paid $2,445 in good faith hoping I would get a Kick ass motor. That's including $350 for Dyno And $115 for shipping. I only asked for the $350 from my Dyno fees and the last thing he said was give him time to sell some stuff. Now It's new story 🤔 Dude Now claims I owe Him $500 But I've had my motor since September, Sent me a PayPal invoice 15Mins ago for Lord knows What 😂 I just want people to see this shit. #PureJoke

Everybody can say the carbs were junk but in reality they made 92 Hp On the Cub Before Nate ever touched it. Honestly It doesn't matter because I told Nate we could do new carbs but he insisted on trying to save them. I didn't BEG NEITHER Cam or Nate to use Parts that they couldn't assure would work. I Asked both of them for advise and ran with what they told me would work Best. Still Trying to figure out where does any excuse made justify keeping money for work not performed?

I just can't see why anyone would be cool with a builder Trying to keep extra money. Because my cylinders needed plating that I PAID FOR? NO It's because I was charged for a Dyno tune that never happened Then dude just stopped replying to my messages. Now since I made a Post online he comes out like Your parts were bad 🤔 So we keep $?

Nate is Lieing Period, Joker Joe Sent my transmission out on December 20th, 2016. Nate didn't know the transmission had Problems until late APRIL 2017. ALL THOSE MONTHS IN HIS POSSESSION AND HE NEVER EVEN LOOKED AT IT 👀 Joker Joe Had the Transmission back On May 5th, Repaired & Shipped back to Nate On May 25Th. DUDE IS A FLAT OUT LIE MAKING POOR EXCUSES FOR A BUILDER.

We wrote this post inform others on how they do business. Thats all we have to say.

Now you jumping online like you never had intentions on paying me You A Bitch Fuck that

Why not reply for 3 months after saying I would get my money returned?

We never had a negative balance When Nate? You a lieing Mf I will drive to Idaho Keep it up.

Porting, Pistons, Plating, Crank got serviced New bearings, New billet Head, Domes, New trans, seals, & gaskets. Everything was there already, I sent him a running 90's Cub Motor I had Raced all 2015. I tore it down to Check Everything and decided to do a full rebuild.

He did send us the motor back But we won't know the caliber of work until it's Dyno tuned 😒 Basically the reason we paid to have it dyno'd. I appreciate all the help, I actually made the post so others looking for work have a heads up. We Not Mad over $350, We're upset Because He tried to Basically cheat us out the money and not respond. After having someone's motor 12+ months You'd think your owed a Skibble of respect. #GuessNotTheseDays

No sir we didn't receive anything, AtvDragRacer admin removed it claiming it made them look bad. Sad part is nate & his wife had 0 intentions of paying me. As I told brett, they won't even read my pm's. We've been a big support to the sport & its sponsors so it sucks when you can't get that same support back!!!!!!

Be Very careful with choosing who have build your motor. With that being said I just want everyone to know that Nate Harames @Kan powersports was paid to build & dyno a motor for us 8/7/16. After a year of waiting, Un answered messages, & countless excuses Ms. Kimmer & Nate called me & finally agreed to ship the motor out 8/16/17 without performing the tune as planned. At that time I was assured funds for the tune would be returned. Long story short the motor arrived 8/21/17 in a Cardboard box tucked Between 50 Lbs of old clothes NOT THE PLASTIC BIN IT WAS SHIPPED IN (Thank God No Damage). After Receiving the motor I notified Nate & Ms. Kimmer to see when my refund would be issued & nate asked for some time. NOW 3 months Later NEITHER ONE OF THEM OPEN OR REPLY TO MY MESSAGES. Hopefully PayPal will help recover my money. This is Just a head up to the small guys looking to go fast & trust sponsors for work 😒 Ask Me if I'll do that again 🤔

I own the 916's But I'm in love.. I know they aren't drag pipes but I sure use them like they are

I will keep you guys updated

I Have a 2002 Banshee .20 Over, 35 mm carbs, Stage IV Cool Head, Dmc 916's, Ect... I Was Riding at 40 mph and the bike just died. I tried restarting with no luck Kick & Roll. It sounds like it's just pushing gas. I Checked Plug and it's wet but no spark.. Changed coil, cdi and Gas. Still No Spark Does anyone have Woodruff key installation instructions?