timothy kaim
-
Posts
72 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by timothy kaim
-
Yes sir thanks tricked!!i woulda never known to check this.
-
Alright new squash results with head torqued down
-
I'll check when i get home
-
I just have the o rings on the cool head And a cosmetic under the cylinders.the head isn't torqued it's just snug
-
Ok this is what I've come up with i did it 4 times left side was.87 right is.90
-
Everything 40$ a peice plus the ship
timothy kaim replied to nastyracing's topic in For Sale - Parts & Accessories
Still have lights? -
K will let ya know the results.thanks
-
U think they are cut correct being that they are scribed
-
Yes I'm gonna try the squash test
-
I don't see any other markings
-
.
-
They are scribed 23mm 4mill on the side of the dome.
-
Ok i gotcha i will have to get a measuring mic tho measure the flux.if there isn't enough clearance if i have 23mm domes should i go to 24s
-
Thank u very much for your help!i will give it a try later off tomorrow.so just measure the squash of the fluxafter the squash?
-
Yes it's a pro design
-
And I'm pretty sure there 23mm domes
-
How do i do a Squash test?the motor has a h.r 4mill stroker crank and wiseco .40 over pistons 795m06500 and when i look up the piston it says long rod.thanks for the help!!
-
Do i use the metal gasket between the cylinders and coolhead
-
Where do they go under the head gasket above it?and also out did have a metal head gasket on it When i took out apart Just don't remember Where the orings go.it's has a 4mill stroker crank and wiseco .40 pistons 795s
-
Hello is their a write up on how to install a cascade pancake bearing?.thanks
-
I don't know yet I just built the motor going to set at 0 for now .30 over h.r 4 mill stroke crank.I will prob go to+4
-
Hey also on the cascade timing plate it only can with three hex head bolts with no washers factory had washers is our necessary tho put them on?
-
Ok thanks hopped up
-
But that's just side to side?
-
How do uadj the pick up gap of it was off I don't anywhere to adjust it.