LA98SHEE

Is there a difference other than color I've heard the plugs might be a different shape Sent from my SAMSUNG-SM-N910A using Tapatalk

I'm looking for a good used cdi box for my 96 it has a gray plug let me know what ya got Sent from my SAMSUNG-SM-N910A using Tapatalk

Yea to get the pro mod style isn't really that bad from redline or Herr jugs I might just go that route I have a bit of cash stashed away for this bike I want to make sure it's done right what about this welding the crank?

Yea does one of the site sponsors sell a complete motor kit as far as bearings and gaskets so that once u find what's wrong I can go ahead and freshen everything up

Does the crank stay with the bottom or top I was wondering if you could roll it over and pull the bottom and look

I have a clicking sound in the transmission on my 96 it only does it in 2nd gear and only when motor is under a load if you jack the rear end up and let it free spin it does not make the sound just when idling around or under a heavier load I think I may have knocked a tooth off of 2nd gear is that correct?

It's a lot of hard packed clay and regular dirt no sand or coal or anything

I just run on trails nothing special the hole shots are just not working

I just run on trails nothing special the hole shots are just not working

I AM LOOKING TO CHANGE THE REAR TIRES ON MY BANSHEE WITH MILD MODS I HAVE HOLESHOTS ON THE REAR AND THEY ARE BAD AS SPINNING UNDER ACCLERATION WHAT DOES EVERYBODY RECOMMEND? AND WHAT SIZE IS EVERYBODY RUNNING?

I have the hero 3 white it was my first gopro and I didn't want to send the money for the black if it didn't work out I LOVE IT I recommend the black if it is in your price range I have seen them cheap on ebay and cragslist

It's not flaking that I can tell they guy that had it before me never cleaned the pipes and right before the expansion chamber there rusted

I have some older FMF SST pipes that are chrome I was thinking of stripping the chrome off because it is rusted on the front of the header I was wondering if anybody has tried this??? If so any pointers I am hoping you will be able to see the welds and kind of give it a factory look and use some high temp clear to seal them

how close do you guys think the jetting is going to be as it sits it is jetted for the airbox lid being off so I was wondering switching to the k&n filters how much richer am I going to have to go?