Jump to content

slimguy379

Members
 View Profile  See their activity

  • Posts

    76

  • Joined

  • Last visited

 Content Type 

Everything posted by slimguy379

  1. slimguy379
    changed the tming back to stock, was running +4. it will pop so at least thats a plus.
  2. slimguy379
    even ga directly in cylander wont start... just checked stator and coil seems fine deffinately have spark though
  3. slimguy379
    so finally put everything together and got my required parts for my carbs. i have spark for sure, but im not sure if im getting gas. the carbs are clean and a fresh rebuild so i dont hink thats the issue. is it my reeds? i think i need to do a compresion test. figured id ask here for any thoughts
  4. slimguy379
    And too when winter hits and I'm not riding I'll have more disposable income.
  5. slimguy379
    Just like the stance
  6. slimguy379
    Thank you for the advice. I mean no disrespect, just seems likealot ofbu guys on here have tons of money invested in your shees. I just rather invest my elsewhere. Again no disrespect. You boys have treated me well on this sight
  7. slimguy379
    Really wish I made your guy's $$$$$$
  8. slimguy379
    U mean a +6 stocker?
  9. slimguy379
    We all don5 make the big bucks I supose
  10. slimguy379
    looking for a 8 to 10 plus swing arm with the stock bearing assembly. did my best to surf the for sale section and and send messages with no luck. any help is greatly appreciated
  11. slimguy379
    bump, one of the last things i need
  12. slimguy379
    yea i guess its a matter of "in the field" testing. the engine is put back together... god i hate doing the cylinder over the rings.
  13. slimguy379
    So your saying the lock up is normal till the engine is running?
  14. slimguy379
    spinning with hand still locks up
  15. slimguy379
    why do my gears not synchronize?
  16. slimguy379
  17. slimguy379
    nope, splines wont line up to get into next gear.. tore it down
  18. slimguy379
    so im having an issue where it feels like im not getting all my gears. is there a specific way the shift star needs to go before the shaft falls onto the star? or am i looking at something a little more serious? not my pic btw. sorry big red...
  19. slimguy379
    bump. still looking, please
  20. slimguy379
    Checked tolerances and got spark.. thank you
  21. slimguy379
    Alright thank you
  22. slimguy379
    What color is the key switch?
  23. slimguy379
    Yea a nice blue one will run me $25. But no the b/w cord is snipped and doing nothing
  24. slimguy379
    good question, seems a switch is in need huh?
  25. slimguy379
    i ended up snippig the wire and soldering in the regulator. i even carried the ground wire from the cdi to the stator. i have it grounded to the frame and i even sanded through the powdercoat to bear metal for the coil but seems i dont have spark. its a new caltric stator and coil... no spark

BHQ Quick Links

×
×
  • Create New...