icytea132

Can someone post pictures of a bent one and. Non bent one.. Mine looks pushed forward but idk I it's bent because I bought another frame and it's the same way

loks good to me ! hahahaha

ahh, ok thankyou sir.

ehh older set of gary dentons'

some*

warm water with soam soap , spary it with the hose, then mothers it

i found a set thats like 125 ucks, but if i get them, i think im better off just buying brand new a-arms

negative. just finshed up blasting my frame got a few other things to do yet.. i was actually looking to see if i could get set with the stock taper. but if worst comes to worst ill ream them ou, anyone know i there is a stock size with 3/4 16tpi ?

get yourself a set of telescoping gauges and a mic set and figure out your cylinders wear in 3 areas ( tope middle bottom, 3 spots around the cylinder)why do more work if you have to?save your bores if ya can

On a stock stroke motor*

What type of power gain do you feel with a cool head with domes 21cc, 20cc, and 19cc?

it does doesn't it?

haha. That's awesome

I had 115 per cylinder after my rebuild, beat running motor ive had so for, I truly don't know what the rebuild level would/could be but with that difference, your putting stress on half of the motor and half of your bearings witch will cause more trouble than just for your pistons. I would test a few things and find your problem on why you are getting lower psi in one cylinder pm me for tips or tricks, gladly help!

Haha..

Haha... "Douche bag" man auto correct takes its toll sometimes

yes "dough bag" I understand this, but I don't know what the taper is so "in the ball park" gives me a clue of where the taper lies before I start. So suckkkkkkitttttttttt

What size reamer did you use? Just to get me in the ball park

That's what I was figuring

Hello, I've recently bought a set of Gary Denton a-arms (I believe) when I recieved them I took apart my old setup and realized the ball joints from stock are smaller than the joints on the dentons.. Was I supposed to have aftermarket spindles? Or can i possible purchase a different set of ball joints? maybe another brand Is universal? if anyone can send me there thread specs on there aftermarket a-arm ball joints i can compare also a place of purchase? Thanks guys

I added a NOS sticker.. Couldn't hold on anymore

Mothers*

hahah, when I cleaned mine I used a variety of things, I get like OCD so it came out really nice but I used wire brushes, scotch bright, tooth pics, cue tips, super clean and razor blades to get and adhesives off. Then to make it look decent i used motors to bring a glimmer out but didn't polish

Idk how it's done either. My shit says its too big

I was gonna sell them. But idk. I'm on the fence if Ivan ever get pictures up there really nice. I put some time into making them as nice as they are. Shinny like a mirror