Jump to content

The-Association

Members
 View Profile  See their activity

  • Posts

    253

  • Joined

  • Last visited

 Content Type 

Everything posted by The-Association

  1. The-Association
    From what I've seen so far was I was able to get 10 psi just from wot
  2. The-Association
    cool. Why don't you like these reeds?
  3. The-Association
    Well it still starts 1St 2 ND kick.. My pickup was not gaped good..I do have prob over 60 hours on her
  4. The-Association
    Good news! Getting 120 on both jugs! To bad my Ebay stator and pick up are junk.. Who would of thunk it? Hah
  5. The-Association
    2ND dibs Sent from my DROID RAZR HD using Xparent BlueTapatalk 2
  6. The-Association
    Yes sRy haven't checked thread
  7. The-Association
    Not a loss in power. Just my left side is taking it's time to warm up
  8. The-Association
    IM going to warm it up and check at wot this time and see what I come up with
  9. The-Association
    Is that the norm?
  10. The-Association
    810 Sent from my DROID RAZR HD using Xparent BlueTapatalk 2
  11. The-Association
    Did a check on jugs and I got about 100 on each one.. But I wasn't aware I needed to have bike warm and at wot..will be checking again tomorrow.. Just wanted to know if this will change drastically or IM in need oh top end..
  12. The-Association
    Good thing I picked up a clean 93 kdx 250 for 100 bucks just gotta change a shift shaft and it should pay for my port job and jazz.
  13. The-Association
    Ya true.. I have my stock carbs, jets at 32.5 and 300 and it's felt great.. Never had to change a plug until a week ago when she started to miss.
  14. The-Association
    Ya I won't know till I crack the top open.. Just was curious on if alot of people just do pistons for piece of mind.. My old bikes I've got away with a rering. Thought I'd notice a power loss.. But the things feels as good as the day I rebuilt it. Maybe a tad less bottom end
  15. The-Association
    Hey guys got a quick question.. Did a test today and got 95 left and 100 right side.. I know I should be at 120 ...I been having trouble with my left side not firing good at start up but then cleans up when warm. so I figured I'd check it...prob got over 50 hours on it since I got jugs cut.. Just wanted some info on your guys piror rebuild experiences, and what is The lowest compression I should be at to rering/hone. Or do most people just change slugs to? Average hours on a top end? Also with this top end IM going to get me a mega impeller.. They trails I ride are tight and I've noticed the shee heats up alot, witch could be why my top end didn't last longer..I got the bigger rat but didn't notice to much cooler temps with it.
  16. The-Association
    Maybe one of them cr 500s but heard are a bitch.. Idk I would like to try a 500 on a 450 frame
  17. The-Association
    Haha even proper grammer would not help.. Why would someone trade a +2 setup for stock arms?
  18. The-Association
    From the info they give on site.. Interceptor is for a power valve 2 stroke and dominator is non power valve.. I run dominator and like it. I also run at 50:1
  19. The-Association
    Pm me interested in vf3
  20. The-Association
    I would like a fan to mount.. some trails I ride are tight and she still gets hot. I'm in!
  21. The-Association
    Interested in pt's
  22. The-Association
    Looking for a good traill pipe.. I have a set of t5's with stingers for trade.. was told pt highs work well with trail ? Sent from my DROID RAZR using Xparent BlueTapatalk 2
  23. The-Association
    So this would help for a better spark(constant) or just help regulate light flicker? Sorry for lack of knowledge but I am looking for a stator for backup.. thx!
  24. The-Association
    Pm me Sent from my DROID RAZR using Xparent BlueTapatalk 2
  25. The-Association
    Yea i was thinkin bout that.. Sent from my DROID RAZR using Xparent BlueTapatalk 2

BHQ Quick Links

×
×
  • Create New...