Jump to content

The-Association

Members
 View Profile  See their activity

  • Posts

    253

  • Joined

  • Last visited

 Content Type 

Posts posted by The-Association

  10. Bad flywheel?

    in Banshee Repairs and Mods

    Posted

    Well I've always used a flywheel puller and had no troubles.. Then my bike started to stumble sometimes rite b4 it got up to normal temp. All I had to do was hit kill switch and kick it over and it was fine, weird rite? That happened for about 2 months of hard riding.. So recently it intermittently miss fired on one side,, put a new plug in and cleared up, rode 3 times and acted up again.. ( since I did my top end maybe more than 60 hours ago I NEVER fauled a plug.) So figured top end needed refreshed. Nope. Good compression so after 9 hours today of trying to clean and check every connection I can clearly point my finger at that damn flywheel... Sry for the story but there's really no " symptoms " of how a flywheel will slowly take a shit! ;)

    • Like 1

  16. Bad flywheel?

    in Banshee Repairs and Mods

    Posted

    Ok so this is were im at.. Cleaned carbs.. Checked reeds, compression, coil, newer stator and pickup , good gap all around.. Bike fires up and run ok at idel..but if you give it gas it Boggs. Now I took off flywheel and noticed it has the sound of sand/bbs rattling in it..so my thoughts it's a bad flywheel.. Question is this symptoms of a bass flywheel?

  18. 394 Stroker Top Speed Problems

    in Banshee Repairs and Mods

    Posted

    I had the 12 on before I changed tires and yes it was really short then.. The bigger tires def changed it.. I wasn't looking for top speed just bottom end.. All my buddies with 4 strokes were amazed when I had to stop mid hill cause I hit a rut and I pulled me of the path. They all thought I would have to turn it around on the hill and try again so the all started moving from the bottom of the hill... Nope gave her a couple revs and off I went..

  19. 394 Stroker Top Speed Problems

    in Banshee Repairs and Mods

    Posted

    Well i found out what my problem is. I decided to take my front sprocket off to change it from a 14t (stock) to a 15t. Turns out the PO had a 12t on it. I don't know why he would want that much accel with no top speed. Anyone know why he would be running that small? Well anyways Im going for a 15t front, just hoping it will fit in my case saver. When it comes ill do another speed test

     

    I run a 12 and love it.. I do run tight trails and hardly hit 6th.. Thinking bout going up one but love the bottom end..I got the razr2s 22" with 10" rear rims. Was told the 10" rims would help reduce the over all weight..

BHQ Quick Links

×
×
  • Create New...