bluepartsman

Adjustable plate SOLD Gear slammer SOLD

Trying to recover some cash stolen by Kcskindeep84. I still have a 50% reward to anyone who can squeeze some of the $400 he has of mine. Anyhow: All prices are shipped to the lower 48 (PR not included). Gift paypal at your own risk Pretty much what you see is what you get: Sprocket hub (gold?) with good 41T steel sprocket. Splines are fully functional. All hardware included $34 shipped to the lower 48 (PR not included) Rear brake hub and rotor. Came of my 2000. Splines are good condition Rotor has some grooves in it but is not bent. Hardware included $34 shipped Adjustable timing plate from FAST. I used it a year perfect shape. $36 shipped Billet Cascade gear slammer. Pinch bolt threads and splines are in rough shape. A grinder and a bolt with a nut will fix it right up $15 shipped Stock brake lever great shape $15 shipped 2000 kill switch and light switch with wires and stock plugs $18 shipped Billet exhaust clamps. I had them on T5’s and T6’s. the rubber is in not so good shape but the billet and hardware is in great shape $38 shipped New never used brake lever and adjustable clutch lever with perch. $30 shipped Reed spacers; plastic $15 shipped; chrome $15 shipped Stock reed cages and reeds. Been sitting around a while only one of the smaller pedals is bent all other look good enough to run. They all came off my running bikes a few years ago $20 shipped for all 4 Stock intake boots with clamps $20 shipped

As the topic title says. Let me.know if there any out there. Got a little project going.

I will buy the flywheel/clutch holder and the chain break.

Kcskindeep84, Where did this guy go? I sent him money march 9th for the crank and he has been pm’ing me every other day saying it is in the mail. Now I cannot see his profile or anything? A month later and all I have is a bogus tracking number, empty commitments, no crank and no $400!? He has been unresponsive the few days now. His PayPal information is: kennyraycollins@gmail.com Does anyone know him?

That usually happens when the flywheel comes loose or has excessive vibrations. It doesn't need to be fall off loose. I just had half my crank replaced from crank works because mine go so bad. Big chunks missing will eat up the fly wheel taper too

I made a reasonable offer 3/26 via pm. It said you read it, does a no response mean you rejected the offer?

What color is asv clutch lever, f3? Shorty?

Send me PayPal info, I will buy rotor for 50 shipped.

$390 including the cheapest ride to NYS

what brand?

Pm sent, heard nothing back in almost 2 days.

Is this for real?! Here is how it will go down. You send me your paypal account. I will send you $135 and my address , you will send me the reeds and I will post the pictures to satisfy your woman friend.

I measured 28-29 inches and that matches up with what the cascade web site says. 55 inches!!! What would I do with the extra? You ran that on a banshee? I am Still looking for a good used one.

I need a rear brake line for the Banshee. I do not know the exact length needed in inches but it’s going on a +12 swing arm with a round house style carrier. I will take some rough measurement tonight to see what length that equates to. I have used a stock brake line on a +6 swing arm with no issue at all so I am not so sure how the catalog classification of rear brake lines goes. I think going from a stock carrier to a round carrier moves the brake mount forward by at least a few inches alone. Like I said I will try and get an inch measurement that I need. -Mike

What is that spring loaded switch above kick starter?

I will take pegs and brake line if available.

Anyone need new pod filters?

Money sent on spring

I need trans. PM Sent

Rear razr tires sold and shipped

Got one, thanks all!

Good thank you. Send paypal and I will send money and address tonight. Mike

A single a arm front end? I have a set of stock a arms and tie rods for sale. Let me know what exactly you looking for