Top Fuel Bender

Its next year already Let's go try it out ! it'd be neat to try a groomed hillclimb

Riding/Hillclimbing on March 1st It's a friday so... call in Sick and let's ride !!! Hitting the Manheim Diner then starting off at Coalhills (Treverton,Pa) lots of new motor setups coming out for the 1st time so if things are going good may try to get over to the Glen Burn

Even though my quad has been rebuilt better and nicer because of this crash Lets leave all this in 2012 and have a quad and rider injury free year !

I got a pair of Maxxis Radials from East Coast ATV had them on my 400ex and now on my Banshee been about 2 years now, wearing great , no leaks lots of rock bashing on the 400ex but now mostly coalhill climbing on the banshee

Looking for: Front Hub Front Stock Rim (pair of bronze/gold wold be nice) Kicker Gear Rear Plastics (prefer Blue, may consider others for the right price) also Honda TRX450 brake lever lmk what you got/want shipped to 18055 Hellertown,Pa thanks [email protected]

Looking to unload my GoPro HD (used about 12 times) comes with new sticky mounts, extra new battery , extra doors LCD Backpack (used 2x), cables , ect... works great , just picked up a GoPro3 so need to unload this one $250 shipped [email protected]

Also wanted to ask does the CDI look at the rising or falling signal from the pickup? reason I asked is , I have a lightened flywheel on the banshee now I was thinking the quad would better with my fatazz with the stock flywheel I got one but the one side of the "tabs" has a radius on it and didn't want it to send a mis-timed signal to the CDI thanks

1st off thanks to those that put together the Banshee Electrical FAQ http://bansheehq.com/forums/index.php?showtopic=133650 Makes life alot easier that being said I needed to eliminate a few gremlins TORS Removed , kill switch unplugged, Key disconnected and wires jumped out repaired bad wires (solder and heat shrink) stator wires stator 13.7-20.5 got 18.3Ω pick-up 94-140 got 117Ω coil wire to wire (no caps) 6020Ω w/NGK Caps 15620Ω , caps 4570Ω & 4980Ω here's were I'm running into q's on my lighting coil and primary coil I'm getting .6Ω should be .26--38 and .28-.38 tried both with 2 different meters on the lowest scale which is 200Ω also got the same results checking my brother-in-laws Banshee Possible the resolution our meters doesn't go low enough to get an accurate reading ? or do we both need Coils ? thanks

Just wanted to say Hi Newbie Here Didn't see anywhere else to post , so I figured I'd do it here 2002 Banshee Ported Cyl. Cool Head 20cc Domes Wiseco .060 pistons T5's Billet Plate 4° timing Armidillo +2+1 A-Arms +5.25" modded Armidillo Swingarm Cyclone Paddles Trail Guy turned Hillclimber Playing in the Coal Regions of Pa