h20dies

Might be I adjusted the idle and now it idles.

Soooo my friend hit the tree on the banshee busted tie rod. Ect ect and we are workin on that but now it won't idle... and won't run good if you let off gas it dies.. It's just not running as fast either. When you totally let off the gas should the gap in the carbs shut all the way? It is slightly open.

http://i1356.photobucket.com/albums/q740/christian_hall2/20130507_161421_zpscdf43625.jpg

So idiot friend of mine was riding my banshee hit power-band and lost control, hit a tree busted my steering rod that goes to the right tire... It busted it where the join is on the right tire the bolt that connects the 2. Soo what is this called how i do i get it and fix it?

Oh and it's an 04 sorry. VERY clean runs great.

For a good shape banshee.. Rear cut fenders.. Tires not so much tread. Trinity stage 4 exhaust v force reeds.. A really nice clean banshee.. how much could this list for..?

Actually it was a bmw 5 series we were racing he was pacing me behind me he was doin 86 and i was slightly pulling away.

So i got my banshee not knowing what it has on it... Only thing I know is it's got tinity stage 4 exhaust, boost bottle, and vforce reeds... I did not put these on it came as is. And It was doin about 87-88 mph on street, is this possible with only those mods or do you think there is some unknown ones?

So banshee been running hot ever since overheated her and coolant started busting out... but now I' m also running a different type of oil.. What coolant.. do I have to buy special for atvs is there problems with banshee water pump? And can I use 50/50 car? And could the different type of oil cause overheating, using lucas high performance semi synthetic at the moment.

So i bought the used banshee and i am finding all these mods it has on it and i noticed a boost bottle.. Should I take it off? Why and how.. what do i do when i take it off? Kinda confused.

Alright guys thanks a ton.

^ This guy... And alright I'll look into that.. And matt? I'm new to the site.

Yeahh but If i were to wipe out during 3-6th gear that would be way worse then 1st. Know what I mean?

I have pipes, and reeds.

Alright guys I need your help... I need mods that a non trained mechanic, or matter of fact not even that good but am willing to try hard and learn. Mods without getting into the engine. Carbs? Or will they be too hard to install for I know nothing about jetting. Pods? You guys sat porting gets a ton out of the banshee so I will do that this summer and send it to a place. You guys say the banshee needs suspension? Gimme mods that make my banshee faster, more reliable and better looking. WITHOUT getting into the engine. The must do's to you guys and the ones I can do.