Jeremy_bell_banshee99

Its like a paper type, it wont burn up will it?

Will it work? Whats the right thickness?

I have some gasket material from auto-zone, i was wondering if i could make some base gaskets for my cylinders and put yamabond on them to seal well? I already missed a big ride today, dont want to have a bunch more down time. But if i need to get some from f.a.s.t then i guess i will. Any help please? Jeremy

Im in need of some cylinder base gaskets for my stock banshee cylinders. And some reed valve gaskets. Please let me know. Thanks. Jeremy

Ttt

I just got a used set of cylinders from a bud who had them as spare. I need some pistons for them. I ONLY want wiseco pro lite pistons, or vitos superstock pistons. They have to be for cylinders bored. 020 over/ 64.5mm please pm me with what you have. Thanks, jeremy.

im going to upload pics when i get to town here in a bit. I need better service.

The piston on the left side looks a little chewed up after a fresh total rebuild. It runs perfect still, i need to know what caused this so i can put a new piston in and not waste money. Thanks for any help.

Whos better? Kevin herr, or jeff?

This year i got a banshee and it was blown up, i just had enough money to fix all the prievous owners mistakes, and get it rebuilt, and do a little bit of painting on the frame. I do not have the money to port my cylinders this year and i really want to ride! Ive been looking around on the site amd narrowed it down to eithet kevin herr or jeff at F.A.S.T to do my porting next winter. Im split on what to decide! I ride some trails, i drag race sometimes for fun, and i run roads. Im wide open maby 68% of the time. I dont know what port job would be best? The trail mx port? The dune play port? Please guys help me out here!

I need to get my steering stem bearing out, tried beating it out but wont work? What will help?

I cant think of a mod that doesnt require re-jetting. Look up vids on jetting on youtube. What type of riding do you do?

I have a good condition trinity stage IV head with 20cc domes, very clean. I want to trade for a chariot head. Please let me know what you have. Thanks.

If u cleaned them really good with carb cleaner, take water and mist it in the bowl of the carbs, if it just runs u had no oil. If it beads off there was oil but you had an airleak or ur not jetted properly, domes too small for ur octane, timing advanced too far, etc.

Got a blown up banshee for 500$ the guy has the thing barely pieced together. It has a trinity head, its got 20cc domes, im wondering how to keep the o-rings in when u put the head on the cylinders? And where can i get an o-ring kit for it? Any site sponsors other than trinity? I dont have a paypal but i could probably find a friend who does to do the transaction of needed. Thanks guys.

Whats your current jetting? Thinkbof it as this: bigger jet will let more fuel under the slide to give it a strong idle. Id get the 2 next size pilot jets.

Theres a fastenal, but they dont have one.

I need an idle screw tap. I dont want to buy the kit though. Anyone have one i can barrow please?

Pm sent

I suppose none of you have a drill and tap youll let me borrow?

Whats your address? Its yours

Well just idle screw kit. Sorry

I need a t.o.r.s eliminator kit. Drill, tap, idle screws. Thanks. Pm me if you have something.

Hoping to help out, make friends. Got it new with my wiseco piston kit. Let me know!

Where can i get race gas? And for how much?