medley

got a set of toomey t-6's pipes and silencers. one has a ding from a rock. $350 shipped. o.b.o. text with any questions. 937-751-2970,scott

i have a nice chrome set of toomey t-6's

Nice bucks. I got me a doe Friday with my muzzleloader. I got her 3 min before sunset. Now its time to let doe's walk and look for a buck. Haha

$90 shipped for carbs and $30 shipped for twist throttle

I just want to have some low end for trails and hills. I dont want it to be dead. Haha

Yea I like to go fast. Lol. My stock motor and chassis 06Gsxr1000 goes 9teens @147mph. Once I get it into the 8'$ on motor im going to put the nitrous kit on it that I have had 2 years. Lol

I will have too look when I get home. My bike is little harder to kick than my buddies. It is one they sell at Sears and autozone. Its not a real cheap one.

it has a brandnew weisco crank in it with maybe 10hrs on it at the most. i kinda dont want to do that just yet. lol. i was going to look into the agressive dune port but get cpi pipes for it. how would the low end be with that?

just like the title says, drilled and tapped with idle screws and the twist throttle is pretty much brand new. i will throw in the other grip (like new) if i can get it off. $140 o.b.o

email pics of pipes and head to [email protected]

160 in each cylinder. fresh wiesco crank and .040 pistons. the pistons are still spotless and i can read the part numbers on the top of them and i have the receipt from the shop that did it.

i feel like my bike is down on power too. it doesnt even wheelie going through the gears on pavement and my buddies comes up 1st,2nd and 3rd. i just dont see why his does when the only difference in ours is "race port work" that his has. his bike has lowend too.

thanks for the info. i have carbon fiber reeds. is dune port good for topend? it kinda feels like my bike falls off on topend and i thought it was the jetting but i guess it is the t-6's. i have spent 2 days playing with jetting,needles and air screws but it's still there. would it help any if i got cpi's right now before porting and ditched the t-6's?

what about intakes? whats a good brand? i dont know if they would do any good or help with my carbs.

he is one that im going to call.

amsoil synthetic in the black bottle

i was just saying what i do. isn't there a happy medium? haha. what would be a good port job ,who does good work and what does it cost? i have a couple buddies that have machine shops and can port and check flow numbers. is there certain tricks that need to be done?

a mix between trail riding and drag racing in dirt.

whie when it did smoke and when it faintly smokes.

28mm keihin pwk's,pro design cool head 21cc dome's, .040 weisco pro lite pistons, weisco crank, +10/-10 timming plate on +4 timming,stock intake, no porting, toomey t-6's. it has a 150 mains in it right now and i have tried 155's and 160's but it runs best with 150's. 50 pilot and air screws 2.5 turns out

what pipes? i thought t-6s were good?

what would cause my shee not to smoke? it faintly smokes out of the left side. i have played with the jetting and needles and still doesnt do anything. it is mixed 32:1.. it is kinda scareing me... . i got the bike about 2 weeks ago and it smoked before i put new plugs in it and fixed the vacuum leakes between the reed cages and the head. my plugs are also cinnamon brown with a little black on them. there are no shiney specs or black specs from detonation.

oh and i have a boost bottle. haha

what part should i go with next? my banshee has 28mm keihin pwk's,pro design cool head 21cc dome's, .040 weisco pro lite pistons, weisco crank, +10/-10 timming plate on +4 timming,stock intake, no porting, toomey t-6's, 13/41 sprockets with 20 inch tires. im really just trying beat my buddy and he has Pro Design Cool Head 21 cc domes,.040 weisco piston,Full Race port on the cylinders,FMF pipes ,Trinity adjustable timing plate,kehien 38mm carb,trinity stage 4 1-2 intake ,vforce reeds, 12/41 gearing with 22 inch tires. he slowly pulls on me untill 4th gear then 5th and 6th he pulls hard on me.

should i mix it 50/50 then since im close to 170? i can get cam2 and its 102octane un leaded.