ban99shee

I have a 1998 Polaris XC 700 with an Aerocharger turbo. It has 800 original miles and is in showroom condition! The sled must be seen in person to be appreciated, it has been a race sled it's entire life. The engine was gone through and it's ready to race. It has new Wiseco pistons, one brand new OEM cylinder, the turbo was just serviced by Aerocharger, crank was inspected and etc. It has run 129mph in 750ft. It can also be ran with less boost and pump gas...it can easily be trail ridden too. Located in the Dells WI. I would take a trade for a Banshee, YFZ450 or a decent small pick-up truck.

This was a rigid set-up so I'm not really sure. You might be able to use a stock shock...it depends on your weight and what your doing with it.

lightend flywheel D-slide carbs

Hemi Head II +6 swinger pipes

Lectrons

I have some more really nice Banshee parts for sale. Most of these parts are basically still new with about 20 minutes of total use since new!! Please reply with any questions. All parts would be packaged extremely well. I have sold a few cranks, engines, cylinders and etc. on HQ and received great feedback on everything. I also offer your money back if you are not satisfied, after returning the parts in the same condition as recieved. I'm located in Wisconsin Dells, WI. Most of these parts were bought brand new and only used for 20-30 minutes total!! The bike was never actually driven...the motor was just ran and tuned. These parts are basically still new and work perfect. You would be hard pressed to find used parts this nice. 1)A set of 38mm Lectron carbs w/alky set-up. SOLD 2)Vito's Hemi Head II with 18cc small bore domes. These parts have about 20 minutes of total use since new. Everthing is in perfect shape with no damage or wear. No major scratches or scuffs...overall it looks excellent. One o-ring is missing though. $125 shipped 3)Alloy intakes w/cross-over tube. The intakes were used with 28mm carbs. The parts are very clean and in excellent shape. $80 shipped 4)Swingarm Shop +6 swingarm w/stock carrier. This swinger has no skidplate mounts and is powercoated silver. It was mounted to a bike but never used! It does has some minor chips in a couple tiny areas, overall it looks great. With a little dust/dirt you wouldn't even notice the flaws. The front needle bearings are also brand new. Includes swinger, carrier, adjustment hardware and etc...everything pictured. $150 plus actual shipping. 5)Trinity Racing OOF chrome drag pipes w/stingers. They were used for about 20 minutes but the bike was not driven. These have no dents or damage. There are some very very tiny spots of chrome that is chipped/flawed. You only notice it when looking at it while holding them in your hands...then putting it right up to your face. The area is also on the underside of the bend so it is not seen while on the bike. The pictures don't even show the flaw! Trinity claims these work with 350-535cc engines. The mounting brackets are included but not pictured. You would be hard pressed to find another set of used pipes this nice!! $400 plus actual shipping. 6)Pro Design alloy adjustable timing plate. This was used more than 20 minutes but is in great condition. This has about 200 miles of total use since new. The threads are also perfect. $50 shipped. 7)lightweight/lightend OEM flywheel. $50 shipped 8)Mikuni 34mm D-slide carbs. These are used and in good working condition. They are complete with no damage or major wear. The outside finish is a little dull. $100 shipped 9)OEM Blaster front shocks. These shocks are in mint condition and were barely used. They look and work perfect. They are actually really cool looking shocks for OEM....they look sharp when mounted on a bike. $45 + actual shipping. 10)Regina 520 X-ring 90 link chain. The chain is brand new. A master link is included but not pictured. $65 shipped 11)Moose Racing rear axle bearing+seal kit. The parts are brand new in the package. This is for dual-row carriers with 4 bearings total. It also fits 2006< stock YFZ450 and 2007< Raptors. $50 shipped 12)Denton adjustable steering stabilizer. It is technically made for a YFZ450 but I also used it on a Banshee and it worked fine. It's in good shape with no damage. $65 shipped 13)Pivot Works linkage rebuild kit. The kit was removed from the original package but was never used. It is complete and in new condition. SOLD 14)Dynatek adjustable cdi box. It looks and works like new. The wires, plugs and shrink wrap have no damage or wear. SOLD 15)Vito's aluminum spacers/plates for strokers. Both are brand new in the package. There is one .063 and one 4mm. The .063 includes two base gaskets, the 4mm has no gaskets. $30ea shipped 16)OEM stock crankshaft. The great works excellent with no problems. It only has about 50 hours of total use. Was ran with Klotz oil too. The needle bearings are not included cause they are currently MIA. $140 shipped 17)complete OEM airbox, two K&N airfilters w/Pre-filters and an aluminum adapter. The airbox has a couple small holes burned in it from the pipes. It does not affect the mounting or performance. Otherwise the parts are in excellent condition. Both filters are very nice with no damage or wear. These were back-up filters and was only used 2-3 times each. They are both clean and ready to use. $60 shipped

Pms sent on the replies.thanks

sent you a pm..thanks

I have some Yamaha wheels/tires for sale. These will fit any Banshee, YFZ450, Raptor, Warrior, Blaster and etc. I'm located in Wisconsin Dells, WI. Please include a zipcode for any shipping qoutes. 1)Cheng Shin 18" C826 Ice Tires with 8x8 Rock aluminum polished rims. The tires and rims are all brand new and in perfect shape. They have never been mounted or used. $150 plus shipping 2)AMS 22x10x9 rear Zipper tires mounted on AMS steel painted rims(hubs not included). The tires/rims are basically still new with only one pass on them! The tires and rims have no wear or damage. $125 plus actual shipping 3)Rear Sand Star paddle tires on Douglas Red label rims. The tires and wheels are in excellent condition! The paddles still have small rubber casting pieces that would wear off right away. The rims have some very minor scuffs from being loaded next to another bike on a trailer. They only have a couple tanks of total use since new. Overall they are in excellent shape. $125 plus shipping 4)Rear Skat-Trak Terrain Trak tires mounted on Douglas cast aluminum wheels. The tires/rims are basically still new, they were used in sand for less than 30 minutes total! The tires and rims have no wear or damage. SOLD 5)Maxxis front Razr Cross tires with ITP Pro Baja black 10x5 rims. The tires are in great shape and have no repairs or damage. The rims have some minor scuffs in the anodizing only...they have no dents or gouges. $125 plus shipping 6)Continental 3.5x10 Zippy 1 front drag tires mounted on aluminum polished rims. The tires are in good shape with no repairs. The rims are straight but do have some minor scuffs. Overall they look nice and work good. SOLD 7)Dunlop 20x10x9 KT355A rear tires. These were the stock tires from my 2007 YFZ450. They were used for about one hour since brand new. They look and work perfect. They have no damage or repairs. SOLD 8)Kenda Knarly 20x11x9 rear tires mounted on OEM 9x9 rims. They have about 200 miles of total use but still work great. The tires have no repairs or major damage. The rims have some very minor scuffs...but no gouges or dents....they spin true. $100 plus shipping Cheng Shin/Rock: Zippers: Sand Stars: Maxxis/ITP: Kendas:

Thanks for all the great feedback guys! Enjoy your parts and ride safe!

All pms returned. The first post will be updated as soon as any parts are sold. All parts are availible unless otherwise listed. thanks

pms returned

I have some more great parts for sale. I have sold a few cylinders, cranks, complete engines and etc on HQ with very happy buyers. So buy with confidence as I also offer your money back if you are not completely satisfied. The parts are located in Wis. Dells, Wisconsin. Local pick-up is also welcome. All shipped parts will be packaged extremely well to ensure there condition. 1)A set of brand new Keihin 35mm PWK carbs. The carbs have never seen fuel! $330 shipped 2)A set of V-Force 3 reeds. These are complete and are in like new condition. They were barely used and look like new. They have about 150 miles of total use. The parts have no wear, chips or damage. SOLD 3)Stock OEM rear axle. Good condition and straight. $40+actual shipping. 4)Trinity 421 Serval Cub cylinder. Also includes Wiseco Pro-Lite 68mm Blaster pistons, stud extenders and plugs(installed). These parts are still like new with only 1 hour of total use. They were bought brand new on 9/26/11 and used one time. The engine was heat cycled and ran with extra oil(Amzoil Dominator) for break in. You would be extramely hard pressed to find another used cylinder this nice!! I ended up going with a big bore instead so these parts have to go. SOLD 5)Hot Rods +4mm crankshaft w/115mm rods. The crank is trued and welded. It has less than 10 hours of total use. Looks and works like new. The wrist pin bearings are included but not pictured. SOLD 6)Hinson HD Billet clutch basket with Hinson buttons and gear. Parts are good shape with little use. SOLD 7)Pro-Design Cool Head. Complete with all o-rings and head studs. The o-rings were brand new, properly greased and only used for about 1 hour...they can still be used with no problems. Also includes a set of 18cc big bore domes. The domes also only have about 1 hour of total use since new. All the parts are in excellent condition. Nothing is damaged or worn. $160 shipped 8)Alloy intakes w/cross-over tube. The intakes were used with 28mm carbs. The parts are very clean and in excellent shape. $80 shipped

thanks bud..yup the lights are amazing!! They work better than most of those $500+ aftermarket kits that are out there. It lights up the trail like a new Audi does the freeway!

heck yeah!! The stock engine is giant! It does have very good stock suspension and is fun to ride all day. You can put over 100 miles and not be worn out.

I have a 2005 Bombardier DS650 Baja with the X package. This is a one owner bike and has less than 40 total original hours. It was adult owned and maintained very well. It was never crashed, rolled or raced. It was used on WI trails only. It is all stock besides having hotgrips and aftermarket rear tires. A brand new HMF pipe, jet kit and K&N airfilter can be included for an extra cost. Overall the bike is spotless and needs nothing. The fenders don't even have any scuffs yet !! Must see in person to appreciate! Also trail registered in WI until 2013. Includes original owners manual, DNR card and tool kit. This also has the X package too. It has factory installed nerf bars, handgaurds, AutoMeter tachometer, rock guard rims, alloy slidplates, alloy bumpers, halegon headlights, X graphics, alloy muffler guard, Ride FX gas shocks w/threaded bodies, shock covers(not pictured) and more! These are great trail bikes for a bigger guy too. They ride nice on the trail, are very comfortable to operate, extremely durable and have tons of torque. Pretty sure these were nearly 50hp stock. Every part on the bike is basically twice the size it really needs to be...these bikes are built for abuse. Located in Wi. Dells WI. Local pick-up with cash only. $2950

You have never been on a real race sled then. 1000'=154mph...that's my personal best... and that aint shit these days for sled.

thanks again Lance !! Will ship out this monday via USPS Proirity Mail. take care

I didn't receive a shipping address until the 4th of Jan. There was no way UPS would have had them there in a couple days. I'm sorry but shipping does take some time.

So.... I guess your not a seroius seller then?? None of my messages or PMs were ever answered.

If you have the time and space....part it out. You will get your asking price in parts no problem.

got the cash..thanks again

I bought some parts from him. They were exactly as desribed. Great comunication and even better packing! No worries here

thanks buddy! enjoy your parts!

pipes were sold..thanks