amont21987

this may be a really dumb question but if i dont gap my plugs can that make my quad miss out at high rpms?

well thats what everyone has told me but i dont see how my first set of carbs did it then the second set that were new did the same thing as soon as i put them on. it doesnt even have to be started if i just turn my gas on its like its running right thru the carb and out the overflow tube

I have a 01 banshee with toomey exhaust, its been bored 0.20 over and ported i have 300 mains stock pilot jets k&n airfilter. my problem is i have gas pouring out of my right side carb but i just bought these carbs because the carbs that were on it when i got it did the same thing and i never could get it to stop so i bought new ones and they are doing the exact same thing and i have no idea why they would be doing that so i was hoping someone out there may be able to give me some advice. it runs great it just leaks gas bad

I need a few little parts to get my quad riding again first I need a nut for my front hub then I need both of the front motor mount bolts because someone didn't tighten them up and they fell out of the nerve bars if yo have any of these I you would please either email me at amont21987@gmail.com or text me at 3179795895 because I don't have a computer and those are the only 2 ways I can communicate until I get my computer back

I'm thinking about buying the vforce3 reeds but I'm curious what the differ ce is between them and boysen power reeds besides the price

I have lost my key and need a whole new set up

Hey guys I am in need of a few parts, I bought some used toomey t5 pipes and need some exhaust hangers for them I would also like to find some of the clamps for the union of pipes and silencers I also need 2 new bolts that hold the front hub on that's in the center of the tire..... Not sure what they are actually called. I want some reed spacers too if anyone has any of these let me kno. I need like all new bolts and stuff for my plastic and for the side covers on my motor

I want reed spacers, pm me ur paypal info please

I'll take the hangers, haven't ever bought anything from jere before tho what do I need to send u the money? I have paypal

I would like the clamps if you still have them, what all have yo sold so far and where are you located. I see you said the frame was titled in Indiana which is where I'm from I also was wondering if you have the bolts to hold the exhaust up as well I have toomey as well but just rebuilt and don't have all my bolts

Yes that's all I have changes recently and yea it has gotten a lot colder and it has the stock mains whatever they r

I haven't jetted it for the port or the bore yet I just got it together and fired it up and took it down the driveway to see if it was running right and to make sure the tors eliminator kit was going to work right

And no I haven checked for air leaks not real sure how to do it

Stock carbs and jets, I hadn't gotten into that yet I didn't take them apart or anything like that

Oh and I also put new boysen power reeds in too but that was before I tore it apart and had it bored and ported