10milmike

Yea rim and tire $1000

John never shut off the pingel lol

It was stupidity on my part. Will never do it again.

Dyno is fee dave.

Dumps are 120 and so are mains. I will going friday to dyno tune it on alky.

Yes. I have done it two times now. It shuts off fine. But I know it was a lean out. I have heard it happen to people before I just never had it happen till friday.

Me too!

See the thing is I shut the pingel off so it leaned out . I never had that problem on q16 before. It's was a leaning experience. Never shut off the pingel.

Ok Alky guys. I have never ran Alky on my drag bike, I always Ran Vp 110 or Q16, My buddy Angel set up carbs bored my 38 pwks to 40mm. PJ is drilled to a .101 and the dumps are 120 and pilot jets are 65, Mattoon bowls and took out a float. Now these are not pumper carbs so I am just running a pingel. I started the bike friday it fired right up. Sounded great. I let it run for a few min then I shut off the pingel. The bike started to full rev out of control. I pulled the tether and it would not shut off. I then pulled the spark plug caps off and it would still not shut off. It rev for about 2min till I pulled a plug out. I know it was a lean out. I Thought shit I just burned a hole in my piston. I pulled the head and I was lucky no damage at all. I put the head back on did a comp test and it was 160 in each jug. So should I run a pingel Guzzler because on the track I do not want the bike to lean out on me.

True story^^^

You want them. 800 bucks just the rims.

In Riverside area

Not all. Are you interested in the paddles?

you still have these?

Yea those are not for sale;)

Great shape some wear. will take a pic.

10 haulers 22x11x8 with drag cut rims. 73 roll out 300 plus shipping.

Maybe or dumont

Looking for a plus 10 dual a arm drag frame. Anyone have one?

IPS FTW!!

Just buy a mattoon backing plate and tap the basket for the bigger bolts. And use the mattoon cushions also. I run that set up on my Hinson and it works great.

How much for just the tires? Because you can buy them brand new from troy a 20x8x10 sd 23 for 168 shipped. Just tires not rims.

My torque wrench. It was smarter then yours.