guns4children

I'm drinking Santana champ cuz its so crisp. I got my swim trunks and my flippy floppies.

I'm riding on dolphin, doing flips an shit.

I'm on a boat bitch!

i know 1000 bucks soulds like alot of money but in the world of banshee hq thats a drop in a hat. Like the other guys said i would save up the extra for a 4mil w/ port job or maybe even a 4 cub if you wanna drag it. your also going to want new pipes thats anoter $500 or so and then it might not shift worth a poo so your going to want the tranny cut thats another 250 or so, then the swinger might be to short for all the add power of the 4mil so your going to need to buy a new one. 250-700 bucks if you want a used one or a new arched one. Thats just the start but if your thinking "damn thats alot of money, im just going stock stroke" i would say give it a year tops after you rebuild your stock motor and youll be spending this kind of money anyways. TRUST me. been there and i have the empty pockets to show for it

x5 on pics of the motor! im going to tell you this and alot of guys wont see it the same way as me but you take from this what you will. I wouldnt buy a stock stroke crank for it just go right to a 4mil or better. the reason i say this is i went from a stock setup, to ported cyls , then to a 4mil serval ( aftermarket mono block cyls made for dune/trail type riding) and i could have saved myself a ton of money just going with the 4mil right off the bat.

Sick of the cub already?

You dont have what you think you have. If it runs as good as you say then just run it but dont go telling ppl what you have cause you might just get slapped. Take pics of the cyls and post them up and we will try to tell you if its a cub/stock.

I got a 500cc big cam rotary stroker on mine. It almost does a backflip when I hit the gas.

Nice bike and good pics. ill let him pass on the not posting the price

Use photobucket to upload pics. Copy and paste (Img) code here.

spent 4 hours bleeding with no luck so i just got a set of yfz brakes and used a bleed tool. they were working in 5 min

Get a 4 mil crank and get your stock cylinders ported for the stroke

shearers made to fit the airbox

When trying to be a dick goes wrong^^^

Lord that's alot of mumbo jumbo ...

DC conversion kit coming soon from SCSS!

as soon as fast gets back to me ill have me some new carb tops and springs!

you guys know if the light springs would work on 35pwks?

i was looking into these as well as the ez springs but it says they are not for PWK carbs. maybe they will still work but i didnt wanna buy them if they were made for another brand of carb. if you find out they do work like me know cause i will be picking up a set!

First make sure you can port your cylinders for the added stroke. Sometimes they are to far gone.

Stupid person fucks banshee up. Then sells banshee to retarded person.

If you want to do it right they will