Jump to content

lms1977

Members
 View Profile  See their activity

  • Posts

    1,918

  • Joined

  • Last visited

  • Days Won

    5

 Content Type 

Everything posted by lms1977

  1. lms1977
    any chance you guys could bring the dyno to pa?? if so I will make it I would like to be there but tooooooo far away
  2. lms1977
    I called them once with a question on a used swingarm I got and they were more than helpful great guys...
  3. lms1977
    Lwatch how wide and how far down you go on the intakes on the out sides the sleeve gets thin between that and the transfers and they will crack over time. Good job on doing this yourself !!!
  4. lms1977
    I would still port before boring it just makes more sense IMO. I have done it both ways but prefer to bore after I port it Sent from my SAMSUNG-SGH-I317 using Tapatalk
  5. lms1977
    its a shame you don't have regular pistons to throw in so you can degree and port prior to boring in case you slip with the porting tools
  6. lms1977
    Here is the issue with the templates for a 4 mil just say you put a 54 mm crank 110 mm rod port it to 192 deg exhaust will give you 27.5 mm roughly top of cyl to top of exhaust port If you do a 58mm crank 110 rod same 27.5 mm will give you more like 201 degree if my calculations are right? You absolutely need to know how to degree a motor in to port it other than that your wasting your time. IMO You also need to know what numbers your shooting for when you degree it in.
  7. lms1977
    that sucks
  8. lms1977
    first off before you even think of porting they cylinders you need to learn how to degree in your motor and figure out what type of rpm you want it to run or where the power needs to be.. the template might get you close but is not the true way to do it, it will probably be a good idea as far as the size or shape of the port possibly thou
  9. lms1977
    It is a good price.. But... They don't seem to sell for that kinda money no one really buys the cheetah stuff for good money.
  10. lms1977
    Do a Yfz frame with a raptor 700 swap there has been a few I seen you get modern suspension, and can easily have 60-70 HP pretty cheap.. They are reliable and have torque out the ass.
  11. lms1977
    FFS jesse we use miles here not km... wtf??? please don't complain about how far it is me and jeff made the trip it was fun as hell 26hrs non stop on the way there and 30 or so hrs on the way home.. you don't even want to know how great of mileage we got
  12. lms1977
    I think what he was trying to say Jesse is a 4 stroke is easier to race power delivery wise for this type of racing. Yes you can make anything work but now you have a quad you dump a lot of money in suspension just to be able to ride in this type of racing .. Then you dump a few more thousand in a motor just to make it easier to race in xc racing. IMO a 4 stroke would be a way better option
  13. lms1977
    Hahaha ok Tyler just made fun of my plumpness green made fun of my last eye and cam tried to burn me and my race bike... Wtf Sent from my SAMSUNG-SGH-I317 using Tapatalk
  14. lms1977
    Yea most people are cool when you meet them in person.. I only had a few that were mean too me one set me and my fiddy on fire won't mention. Names "CAM" and one kept making fun of me being fat and having a crooked eye "TYLER" but other than that they were nice
  15. lms1977
    Yea I was gonna say 48 pilots and 155-165 to start should put you in a safe spot to start
  16. lms1977
    GAY
  17. lms1977
    yep serval would be your best bet imo
  18. lms1977
    Sometimes they don't clean up with only going .25 mm that's only .005 per side now if yours are worn at all that is now .004 or less per side if there is any scratches or not perfectly round or parallel worn harder at ports etc. One or both won't clean up. If it were me I would just do the .5 mm over if I had to give the machine shop the pistons I run into this when I bore cylinders blasters especially are always out of round and usually need to go .5 mm bigger
  19. lms1977
    yep 1211
  20. lms1977
    I made the mistake of trying to use a airbox with my 465 serval When I put pods on it was like night and day.
  21. lms1977
    All I have on mine is big bars and heavy springs in front.and a cheap shock in the rear.. You don't need much to have fun on these little things. I rode mine yesterday for a half hr just doing wheelies while my kid rode his scooter there just plain fun.
  22. lms1977
    Hell yea can't go wrong with the lil fiddy I was just out ripping mine... Good luck man..
  23. lms1977
    there is no for sure answer.. if it seems good then your probably ok, tighten your plugs up good to crush the washer then back them off and just snug them a little and take it for a rip, if they still don't back out at all and there is no sign of deto on the plugs etc then your probably safe?? if it were me I would build it closer to 145-150 psi for pump with the bigger motor how do you like it so far?
  24. lms1977
    nice job cant wait to hear how they work
  25. lms1977
    what are your port timings at? depending on the porting it might be lazy on the bottom its a give and take thing

BHQ Quick Links

×
×
  • Create New...