slag_350300

Any sponsors have any good deals on 421 cub cylinders, pistons and +4 crank?

Yeah if I could oif uploaded bigger photos I would have but the intake bridge was broken out and theres alot more damage than in those pics I just uploaded that angle. and yeah I know it was more than an airleak.

Went for a ride last week and was 4 th gear on the throttle when it made the worst noise Ive ever heard an engine make. Check out these pics. Must have had an air leak somewhere. Time for a 4 mill build. It was stock crank with paul turner ported cylinders bored .60 over. The ignition side piston looks fine. When I pulled off my clutch side pipe the wrist pin, remnants of wrist pin bearing and piston particles fell out of the pipe onto the floor.

Looking to buy a set of Roll Design foot pegs with kick up. Pics and price please. Thanks

Hey, Ive searched online and found several different types of cylinders for the banshee. The serval, cheetah cub, wampus, etc. Can anyone please explain the difference between them all? Im planning a budget to build a 421 +4 banshee motor and am not really sure where to start on which cylinder kit to look into. Thanks a bunch

How much for the intake? Is there a carb included?

Alright Ill keep you in mind. I will see if anyone else chimes in first. I forgot to mention that the cylinders were bored .60 over

Hi, Ive got some ported Paul Turner National cylinders in great shape comes with pro x pistons and a stock crank all in good working order. The pistons and crank were replaced less than 5 hours of ride time. Im looking for 421 cub cylinder and hot rods 4mm crank would be willing to trade and extra money if someone has some laying around that are in good shape. thanks

Hey was just wondering if any site sponsors on here sell outerwears for Uni pod filters? I have 34mm carbs and the filters I have are 5" in length.

Alright easy enough. Thanks for the reply!

I bought a Boss Racing intake block and a set of pod filters. Made an airbox out of sheet metal to help keep water out of the filters and now I am wondering what to do with my coolant bottle? Is it mandatory to have that on the banshee or can I eliminate it? I did a search on this site to try and find an existing forum cause Im sure there is one but I didnt have any luck finding one that resembled what I was lookin for. Thanks

I had the same thing happen to mine too I used a 3 jaw puller and it pulled flywheel damn near inside out. I ended up just splitting the cases with the flywheel and stator still on the crank. I ended up buying another crank and luckily my friend had a spare flywheel and stator laying around. Think I might go down there and break it loose now thinking of it. Probally be good to bust it loose every so often so it wont happen again. Ive had 1983 3 wheeler that sat outside forever and road hard thru salt water and they were never this hard to take off.

Dang. Wish I would of seen this a month ago. I bought a used one off ebay with 20cc domes, no studs and worn out o-rings for $170

Hey guys Im looking for a used +2 swing arm. Preferably not chromed. Send me a private message if you have one you would like to sell. Also possibly looking for +2 +1 a-arms if the price is right. Thanks Also looking for the ball joints that press into the lower a-arms.

Sorry for the delay in responding guys. I was out of town. I decided to hang onto the head and I sold the pipes to a buddy. Thanks for the inquiries.

Set of Paul Turner chrome midrange pipes and fatboy silencers in fair condition. Has surface rust on pipes. One of the silencer ends that goes into the pipe is damaged but still works fine with exhaust clamps. I just repacked them. I bought a set of Toomey T5s so these have to go. Selling a stock banshee head that has been shaved down. Im not sure how much has been taken off, I bought the banshee with this on it. It has engravings on the top surface with ID numbers and says Paul Turner. I bought a Pro Designs head so this one has to go. Id like $150 for the exhaust shipped and Im not sure what the head is worth so Im open to offers. I will take photos when I go down to the shop tomarrow and post them up. I also have a set of stock head lights, stock thumb throttle with cable, brand new Motion pro cable for TORS carbs (ordered wrong one), and a few more odds and ends I will post up tomarrow.

Would you sell the exhaust clamps? PM me. Thanks

I did a search first of all on the exhaust forum and main site and didnt find anything. I was wondering if any of you guys ran Bills pipes and how you liked them? I currenty have Paul Turner mid range pipes on there now and want to try a set of the Bills. Just thought I would try and get some reviews from someone who has tried them. How do they sound compared to other pipes? What part of the powerband do they improve?

Do you have pics of the pipes? Are the silencers included? How much for shipping?

Looking for a set of Spider trac tires, 22x12.5 for 8,9 or 10" wheels. Used with good tread or preferably brand new.

Can you PM me photos of the Bills pipes.