Braap_a_Banshee

Kevin at HJR did mine and i could not be any happier. His turn around was fast, his customer service is great, and he will answer any question you throw at him. The jugs themselves after i received them back from kevin looked great, but when i put them on, wow, my banshee was a whole new beast. Haven't heard anything bad from any of the sponsors though. Good luck with making your decision

there was close to nobody out there last weekend and the sand was the most chewed up it has ever been when i have ridden out there. then it rained and it got hard and rutted. not a good combo. the rain made the lips on the jumps good though.

i run t6's on dune ported cylinders and it runs great! i was worried about having zero top end and gettin beat at the drags. but for all around riding it is great. didnt get beat at the drags either. i've ridden a banshee with fmf gnarlies before back when my shee was stock and i couldnt stand it. if you are running a stock shee t6's are most likely your best bet.

be prepared for some rough sand. i was down there last weekend

the piston is moving but i can hear something sort of grinding below it. i am going to pull the cylinder off today

so far i have the head off and the intake off. there is a very slight dent in the top of the piston on the left cylinder. it is tiny. would that affect it?

there is 0 compression in the left cylinder

i havent checked. ill have more information the situation later this week

bump

i just finished a run at the drags. and this was after a leisurely ride through the dunes. i was turning around and going to line back up at the start. i was riding slowly in 2nd gear and the quad bogged down and died. it would not start. i noticed that the piston in the left cylinder was the problem, but i dunno whats wrong with it yet. its almost like the piston isnt moving everytime i kick it. of course i will be taking it back apart to see what the issue is sometime this week, but what should i be looking for?

back when my quad had nothing on it but t6's and pod filters, i would beat every ds that i would drag at pismo. from stock to piped. never lost to one except for a group of 3 guys that had alba racing ds's that were quick!

alright, so i have the carb apart. and the floats in hand. how do i measure 16mm? could you explain that please?

thats what i was thinking. and i have cleaned it all 2 times. but nothing seems to be freeing them up. what do you suggest that i do to fix it? i mean i have sprayed carb cleaner to try and free things up, but im lost for ideas

just got a new keihin pwk 39 mm carb. as soon as i turn the gas on, gas flow out of the overflow tube on the bowl. i dont know what the problem is! i have cleaned it a couple of times and cant find a problem. it continues to leak gas even when the motor is running. i need help fast please!

x2 on new o rings

the idle kit that comes with tors elimination, is the screw supposed to catch on the slanted groove? i am lost as to why the idle screw is not working.

i may have switched the slides when i eliminated the tors unfortunately... ill take them apart later on today or friday and see what my situation is. im savin up money to invest in pwk 28mm so is goin through all this trouble worth it?

so if you accidentally switched the left slide to the right carb and vice versa the idle screws will be worthless?

they are filed down to 3/4 inch like in the directions

i eliminated the tors and installed the included idle screw kit. but it doesnt seem to do anything to adjust the idle... i've got a week and a half to dial my shee in before i head off to pismo so any help will be much appreciated

i run t6's on my ported bike. i know everyone says it chokes the bike out but it still rips. especially in the mid.

i would go with t6's. i love them

i have been running the same k&ns abnd outerwears for about 7 years now and i have had no issues.

i got this banshee as a hand me down from my brother after i out grew my blaster. im workin on the money to get a set of shearer in frames!

i just recently rebuilt my top end and got my jugs ported. just made sure everything worked ok then put it all back together and let her rip