Jump to content

slayer720

Members
 View Profile  See their activity

  • Posts

    32

  • Joined

  • Last visited

 Content Type 

Everything posted by slayer720

  1. slayer720
    Here's some better pics of the footpegs that you were asking about
  2. slayer720
    I made those too. I don't have any currently but I'll post some up tomorrow. They're a 1-1/4" dia. 1440 chromoly tube that has been knurled and then grooved for a drag peg style.
  3. slayer720
    I was wondering how long it'd take for someone to point that out. I got a smokin' deal on the CPI's because their silencers were F'd beyond repair and I had these FMF Powercore II's lying around so I threw them on. Took a few minutes of torching and bending to get them to line up correctly, but it's custom. I like the look of them over the CPI silencers anyways because of the larger polished surface area.
  4. slayer720
    I had originally planned on getting a roundhouse, but I decided to fab my own ladder swinger instead. Haha, it has happened once or twice, but that was back in my jumping days. The rearward facing spike tips are rounded off pretty good now so they deflect if you hit them. It's mainly a hill shooter now anyways. The whole theme of my bike is the nautical stars so I have engraved it onto every cover that I've made for it. To each his own though. I made them as well as the back ones. They're spikes that attach with a set screw from the side. Cute??
  5. slayer720
    I just wanted to share some pics of my custom CNC'd billet aluminum stiff ring that I made for my new Direct Drive lockout clutch. And some full body shots... Look at that ass though Get'n nasty with it
  6. slayer720
    ***** SOLD SOLD SOLD *****
  7. slayer720
    It's the same as stock.
  8. slayer720
    How is the price steep? The carbs cost $225 new, filters are $99, and I had LeD Performance do the 30mm taper bore for $130... so that's $455 total. $280 is pretty damn reasonable in my eye.
  9. slayer720
    Bump.. Bump.. Bump it up!
  10. slayer720
    I have been running FMF Fatty gold Series pipes with Powercore II silencers ever since I purchased my banshee and just recently found a smokin' deal on a set of SB CPI inframes that I couldn't pass up I was just curious as to what you guys would recommend for jetting with the CPI's. My mods are: Stock cylinders with LED Performance sandman port job (They've also been bored out 2-3 times but I can't remember what they're out to) 28mm Keihin carbs with a LED Performance 30mm taper bore Uni-pod filters Running at sea level I was looking through the "What jets are you using?" thread and saw a similar setup to mine where the guy was running a 25 pilot and 310 mains... does that sound like a good starting point? Thanks guys
  11. slayer720
    To the top
  12. slayer720
    Stock carbs with cable and TORS lowered to $70 shipped
  13. slayer720
    I just sold the 2 into 1 with filter yesterday
  14. slayer720
    You've been PM'd
  15. slayer720
    I have a set of 2004 stock banshee carburetors with the TORS system, throttle cable and a K&N large 2 into 1 air filter with a custom bracket all for $120 shipped. I also have: A stock stator cover complete with the gasket and polished SS bolts for $12 shipped (The cover had been painted but it is beginning to wear/flake off). A front bumper/grill that is cut out of aluminum and painted to look like teeth for $12 shipped (This looks killer with a set of Cascade evil eye headlight covers). My contact info is: the_ghost_flame@yahoo.com or call/text 503-757-652six and I live in Portland Oregon.
  16. slayer720
    Paddles and Brake Line have been sold!!!
  17. slayer720
    Bump..... Nobody is interested?
  18. slayer720
    Bump to the top
  19. slayer720
    Responded Edit: I also have a set of stock carbs with the TORS system and a two into one K&N air filter with modified bracket to run with the stock air box. Make an offer.
  20. slayer720
    Name: Mike Popma City/State: Oregon City, OR Zip code: 97045 Contact: the_ghost_flame@yahoo.com (email is preferred and the fastest response) I have a set of 21x12x8 12-paddle Skat Trak Haulers. I got them last summer and only have three trips on them. I can mount them on a set of powdercoated black douglas blue labels or I have a set of honda wheels that have been modified to fit a banshee (Pictured), your choice. I am looking to get $275 + shipping for them. I also have a 30" Red Cascade Innovations rear brake line for a 12" over round housing or 6" over stock carrier swingarm. I'll let it go for $15 shipped
  21. slayer720
    Communication was super fast. The item was packaged good enough to withstand a drop from a plane and was shipped extremely fast. Overall, this guy is an awesome Seller. Thanks
  22. slayer720
  23. slayer720
    Hi, I'm looking for a billet stator side cover. Let me know what you've got. Shoot me a PM, Thanks.
  24. slayer720
    Hi, i'm looking for a set of K&N filter pods to fit 28mm PWK's. Shoot me a PM if you've got a set or call/text: 503-757-6526
  25. slayer720
    Twist throttle sold to me

BHQ Quick Links

×
×
  • Create New...