ugottalovewagner

I have one that is +6. I have a carrier with a nice blue brake plate, a shock revalved for this swinger, a brake line, and a chain for it. I would let it all go for $500 shipped if you are interested or i will seperate it if you just want some of the stuff...

best offer is gonna get these pipes if not they are going on ebay in a few days... $150 shipped and i wont go any lower

Ive got a set of Trinity drag pipes. They are small flange and were on a 420 big bore motor. They are out each side. They have a small spot that was welded and also the hanger was repaired. The chrome is in fairly good shape has a few small rust spots and some dull spots. They look really good when mounted up though. Im looking to get $200 Shipped or trade for any aftermarket banshee parts. i have more pics if you are interested im located in Crown Point, IN my cell is 518-929-7653 if you want to text

Am i asking too much? im willing to make some trades too if anybody is interested

ttt

I have some drag parts for sale here is what i have all prices are shipped in the USA, Im located in Crown Point, IN if anybody wants to meet up or i could meet at silver lake. feel free to pm me or text 518-929-7653 for any questions all prices are obo Trinity Stage IV Cool head with 17cc big bore alcohol domes with 9 degree angle needs O-Rings $125 shipped Chrome Drag pipes( I believe they are Trinity) SF OOF out each side. Has 2 small welds and some rough spots in the chrome but very usable $225 34mm Keihn PJ Carbs on ALKY. Comes with cable, throttle, and pod filters. one bowl was welded and smoothed to fit on clutch side $200 or trade for gas carbs.

I should have been more specific. I need a set of stock stroke cylinders. Would like them to be 68-69mm and either stock sleeved cylinders or cub cylinders or whatever you have

I need a set of big bore banshee cylinders, I would take anything, some sleeved cylinders, a cub setup, whatever you have. Just trying to get my drag motor going. LEt me know what you have. i have some things to trade if you are interested

I also have a 4mm 420cc motor on alcohol with carbs and everything needed to install that i might be willing to throw in for the right deal..

Ive got a Banshee that i just basically finished building and now I want something else. Ill try to list everything that is done to it but Im sure i'm leaving something out. I might end up parting it out if i don't get any takers. I would like to trade for a street bike, pickup, car, dirt bike, or 4 stroke 4 wheeler. let me know what you have. It is located in Northwest Indiana and my number is 518-929-7653 or you can pm me on here. I can send better pictures if you are interested. Im looking to sell it for $3200 or trade for anything of equal value -Candy Blue powder coated frame -+2 Alba A-Arms with Elka front shocks -+6 Tyson Swingarm with revalved rear shock -Motor professionally ported by Redline Racing and is bored .40 over with almost new top end and new clutch. -FMF pipes and silencers -Chrome Rear axle with Lonestar Hubs -28mm oko carbs with Uni pod filters -Chrome V bars -Race cut plastics -lots of little extras like chain roller, chrome exhaust mounts, case saver, and a bunch more

I Should have everything except the cdi. do you have the square plug stator or the round one? thanks jeremy

Im looking for a set of stock stroke cub cylinders. Let me know what you have and how much you want. Thanks Jeremy

Dibs on the waterpump cover, pics to ugottalovewagner@hotmail please

pics of the pipes to [email protected] please thanks jeremy

does nobody need a motor? Make me an offer? ill go $450 shipped, if nobody wants it for that ill just keep it

I think the carbs are sold so ill go $550 shipped with everything else. this is a great deal i just need to get rid of it

free bump for a great seller... would buy from him again any day

PM sent to chevy banshee

Im willing to trade for aftermarket banshee parts or anything that i can make a few bucks on let me know what you got

pm sent

pm sent to darthwall

Ive got a big bore banshee motor. I bought it from a member who thought it was a 4 mil and I just wanted the bottom end. Turns out it isn't so I decided to sell it. The pistons are stamped 69.42mm making it a 408cc motor. Everything else appears to be stock except the head has been milled. There is a little bit of chain whack but it has been smoothed out and doesn't look too bad. The head is off right now so it will need to be put back on with a new gasket. I was told this motor runs good, however I think it needs a new stator. I have never tried to start it but everything looks good to me. It will come with a set of stock intakes and reeds and also ill throw in a set of 34mm mikuni round slides with a throttle cable. I will also include a wiring harness and a set of stock carbs that need a little bit of work. let me know if you have any questions, I will do my best to answer them. I'm located in Lincoln, NE and my number is 518-929-7653 or pm me for more info. I know I am kinda new here but I have perfect ebay feedback and am an honest person. Asking $700 obo shipped for everything

that flywheel puller fits a banshee i assume? if so ill take it give me your payapl thanks jeremy

Pics of 34mm pj's and billet intakes to [email protected] please thanks jeremy

payment sent for bumper