crazyj789

PM sent

This guy has ALOT of banshee stuff. I went there to pick up some parts for my banshee and he has TONS of stuff just ask and he might have it!!! Free Bump

I run all my machines with it Raptor 700r, 89 LT500r and now my banshee just works out better

I have a 97 shee 1 size over stock bore, +4 timing plate, PT mids and Fatboy 2 exhaust, stock carbs with TORS removed, crossove tube, reed spacers with stock reeds, ProFlow with K&N filter, K&N powerlid, race gas 110 oct. leaded with klotz RD50 32:1 mix, 500 to 800 ft above sealevel, temp 65 to 90 degrees F, what would be a good start on jetting this setup, Im thinking 27.5 pilot, 280-300 main, needle middle clip, air screw 1.5 to 2 turns out. Any sugestions are welcome Thanks, J

PM sent

PM sent on reed spacers

Was wondering if anyone knows what hangers to use to mount the PT mids pipes and fatboy 2 silencers. I had toomey tr6's and the hangers for those wont work any suggestions? Thanks, J

PM sent

Bought a complete stock airbox off him and it was just as described. Fast shipping great seller A+

that will work great thanks alot

Hey HQ just was wondering if someone has a link or a video to properly install the TORS removal kit from FAST racing. I spoke to jeff and it sounds easy enough but I always like to read or see pictures of the install. Any help would be great thanks guys. J

Im looking for a set of Kehin 33mm PWK's or air strikers doesnt matter. Plz PM me a price shipped to 46385 and any pics to [email protected] Thanks alot in advance. jason

This is great advise thanks alot guys I believe Im going to go with 33's and billet bowls. I have plenty of money so we all like a little bling Im going to be running 100 octane Leaded race fuel in this 32:1 with klotz RD50

Ok here goes Im planning to build a 4 mil shee engine. Here is the list FAST woods port with matched case porting Stock head Paul Turner rechambered Adjustable Timing plate +4 FAST wiseco Hotrods +4mil crank with extra welds bore 1 size over stock with pro-x pistons v-force 3 reeds with open stuffers FAST billet intake with crossover built in Billet bowls for carbs (whatever size I need) FAST straight cut gears and billet basket and clutch kit PT mids with fatboy silencers Stock airbox with foam filter and custom lid and all the other small mods we all know and love bearing wise I mosly ride at the Badlands, Haspin acres, and sometimes Silver lakes. I really enjoy trail with the alot of hills. I need to know what size carbs (Kehin wize) that I should run in Northwest Indiana. What is best!! for this setup also any jetting tips for this setup Thanks alot guys. Lemme know Jason

Bansheefever has a great airbox would like to look at a few more offers If ppl have them. Thanks

PM sent

Im looking for a stock airbox that will fit a 97 banshee. If it has a lid fine but no big deal if it doesnt. The airbox CANNOT have any mods done to it eg. Holes drilled in it, Vents added, cracks, absolutely stock. NO mods at all. I will pay with Pay-pal, money order or what ever works. Please send pics to [email protected] include price shipped to 46385. Thanks alot guys and happy riding!! PM me as well

Ill take the Q pipe setup that is a good price put it on www.quadracerhq.com it will sell

PM sent

Bought a set of PT mids with silencers off sheerider1026 and they were exactly as described. Super fast shipping. He is a trusted seller on HQ!!!!! Thanks alot A++++

Interested in pipes just need to know what years they fit!!! PM me when you get a chance. Thanks

Bump to the top still have parts make offers

I STILL HAVE ALL PARTS FOR SALE HERE IS A PHOTO BUCKET LINK TO SEE ALL PICTURES PRICES ARE OFFERS AND OBO http://s759.photobucket.com/albums/xx231/crazyj789/banshee%20parts/ Thanks