crazyj789

Alright guys these LRD's need to go $100 shipped can email pics OBO guys up for offers

T6's SOLD thank you sir LRD's still for sale can email or text good pics of head pipes price for LRD's is $120 shipped OBO

Toomey T6 pipe set sale pending LRD head pipes still for sale new price $120 shipped

I have two sets of pipes 1 set of LRD adjustable head pipes fair to good condition no silencers also a set of Toomey T6's with silencers good shape some gold tint by head chrome very small dents all mounting hardware. I have pics will email or text them to you will post pics tomorrow. Just checking interest. LRD pipes $150 shipped Toomeys $200 shipped or local pick up in NW Indiana

bump ttt

Looking for a set of 28mm PWK carbs if you have any you want to sell please PM me thanks

1) What type of aftermarket exhaust do you have? (Paul Turner Mids with fatboy 2 silencers) 2) What type of airfilter do you have? K&N 3) Are you a)running a stock airbox with lid stock airbox with NO lid c) Stock airbox with vents d) no airbox at all (Stock airbox with proflow adaptor and K&N powerlid) 4) What is your elevation? (If you don't know, go here: http://www.topozone.com ) (600-800 ft. above) 5) What size pilot jets are you using? (27.5) 6) What size main jets are you using? (300) 7) What temperature is your Banshee jetted for? (60-90 degress F) 8) Do you have a port job? (stock port) 9) What kind of carbs? (stock TORS removed) 10) What size carbs? (stock TORS removed) Needle clip 2nd postion from top due to VF2 reeds

very nice bikes if only I had the money

Hello all I was looking into possibly getting a lightened flywheel. Does this actually make a difference? I have extra money and all mods done porting, pipes, carbs, etc so everything is done just wondering about this. Does it make the engine rev faster? Improve anything or is it a waste of time?

Hello Im looking for a set of PT High Rev Head pipes any condition as long as there isnt any dents. PM me if you have any for sale

PM sent

It hits hard on the top very very slight surge as described.

I have the mid pipes cuz I like the power and not just top end. Never anything around here to ride all top end. I believe clutch slipping or slightly lean on the mains. Im going to check the clutch over and do more plug chops with a 310 main and see if it goes away. It just has a slight surge at WOT 6th gear. When I hold the throttle at approx 3/4 or slightly higher but not WOT it seems to clear up an GO but at WOT it has a surge. I dunno tho

Hello HQ I have a 97 banshee that I have redone. When I run 6th WOT to check my jetting it surges like it wants to go faster but cant what could be causing this? Here is the break down from top to bottom BR8ES sparkys Stock coil, CDI, and wires Cool Head with 18cc domes running 110 leaded race gas with Klotz RD50 32:1 50 over bore with vitos superstock pistons Stock Porting PT mid pipes with fatboy 2 silencers VF2's with stock intakes and cross over tube Stock carbs with TORS removed jetting (300 mains, 27.5 pilots, needle 2nd position from top) 600 - 800 above sea level temp 60-90 degrees mostly aggressive trail riding Stock airbox with pro flow K & N setup with K & N Powerlid +4 timing plate set at +4 Billet Basket with FAST heavy duty clutch brand new everything and pancake bearing The bike revs out great no bogging hits the pipes everything is great just when it hits the top of 6th gear it surges like it wants to go faster but just cant. Is it lean on the mains? I have good plug color from several plug chops. Is the clutch slipping a little? Its all brand new! Is the ignition to light? Do I need a nology coil with hot wires? I just dont know please give me a hand. Thanks

Pics of everything please to [email protected] Thanks

Parts just as derscribed will buy from again thanks alot

PM sent

Hello all I was wondering if anyone has any info on a GYTR cdi for the banshee? Does it improve anything? I cant seem to find anything about one on google or at dealerships. There is one for sale on here and I want to know alittle bit more about it before I buy it. Thanks everyone

PM sent for GYTR CDI

PM sent

I also payed for the pro design EZ drain cover payment has been sent

Ill take the clutch cover and the EZ drain cover right now Pay-Pal ready PM sent

Check this thread out this guy has a set of burgard a arms +2 +1 with spindles and tierods a complete bolt on set ready to ride. I believe he wants $350 but check the link. Its the set of silvervein powdercoated in the picture. He is a good guy to deal with and I know he still has the set. http://bansheehq.com/forums/index.php?showtopic=128172

PM sent

Is the frame being sent to germany? If so you should see how long it takes to get stuff like that in the states Ill get ahold of him and see what is going on with it for you. I keep in good contact with him.