Jtw

I'll have the bike torn down this week an then I'll let u know

Sent pm

Seems like alot of work and money to send them out. Can I just get rid of the t-Rex top end and run a stock top end with the long rod setup? Would I have to change my carbs if this is possible?(35mm) What are some alternatives? Any one looking for of these top ends???

Looking for a new or used 4 mil crank with 115 long rods. Tell me what u gave and price with shipping to 79928

Did u sell it???

my mechanic said the seals were allowing oil from the bottom end (transmission fluid i'm assuming) out and up through the top end, through the exhaust pipes. that problem's been fixed. skip to the bottom of my post.

i bought a used banshee from a guy who was in need of money awhile back, i had always ridden 4 strokes and have never been into drag racing unless for shits and giggles. the bike came with a t-rex top end and needed crank seals bad. oil was coming out the exhaust and muffler packing was soaked in oil. fixed that problem and then i had to spend a hundred dollars in jets trying to get the jetting right. once i "thought" i had the bike running good i raced one of my friends, who has a 400cc quad with a big bore kit making it a 440cc, and he stays right next to me when drag racing. sometimes he even wins. so i started doing some research because i thought, "if this t-rex top end is all that" and so expensive, how come i cant smoke a 440cc suzuki right? i read on a site that sells the t-rex top end and it says you need to run a 4mill crank with 115 long rods, so i asked the previous owner if it had a 4mil, he said no, stock crank with long rods, so is my bike slow cause of this? im running the recommended 35mm carbs and even very close to factory recommended jetting. now im trying to figure out if i just wanna sell the top end and buy a used stock one, or spend the loot putting in a 4 mil in and see how it runs, like i said i dont drag for competition, i mostly trail ride and dune. ive already spent alot of money in the suspension making it trail worthy, now i gotta figure out what motor i should run, funds are tight cause of x-mas and just paid my tuition off, so what should i do, if i sell the top end how much could i get? with the stock crank and long rods could i bore out some stock cylinders and get good power, i like alot of torque, plus i wanna smoke them 4 pokes when i drag for fun, any advice would be great.

How much? Shipping to 79928

Hownmuch for plastics, all of them, shipping to 79928

hmm....the sounds yours makes sounds similar to mine, maybe mines just louder cause im running a t-rex top end.... i hate to take it to the shop for nothing,

i hadnt ran my bike in about 3 months cause i was doing a suspension upgrade, now i feel like there is a weird knocking noise from the motor, heres the u tube link any help would be appreciated.

Sold!

Yes they are

Thanks "fast"!

Obo guys, I paid 130. So I'm taking a loss for being dumb. Just wanna recoup some of my money back

To be honest guys I don't know if they are regular , or two's. I know if it was a three it would have a 3 written on it. These just say v force reed valve sytem on them. I never asked the member I bought them from because I just wanted new reeds.

No they are regular v force reeds

i have a set of v force reeds for a banshee i bought at the beginning of the month from fast-fibers(member here) that i cant use, i have a t-rex head and apparently i should have done some research before i bought these reeds from him. my t-rex head uses yz250 reed cages. i have not mounted these reeds up, but was told they are in perfectly working order. "fast" if you read this please chime in. 120 shipped http://s1229.photobucket.com/albums/ee461/o0iceman0o1/v%20force%20reeds/

Obo guys, just need this stuff out the garage. Just cover shipping and a couple bucks for the trip to the post office and your offer won't be refused

hey brother i have contacted you more than once on those plastics, you still havent got back, ive gotten quotes from other members for shipping plastics any where from 40 to 65 through usps and grey hound, so im not sure if you dont really wanna sell those plastics or its a hassle for you or i dunno what? i told you id give you more than 150, just tell me what you want for em?? thanks

I need some front and rear exhaust hangers & clamps, some nice plastics, dip stick, rear skid plate, flywheel puller, adj timing plate, paddles, New rear brake rotor. Radiator grill insert. Let me know prices with shipping.

i have some stock parts i have sitting in my garage, all prices are wtih shipping and obo. i will be using paypal so paypal fees will need to be paid by buyer. or can be sent as gift. stock calipers 45, 25 each if i separate stock front rotors and hubs 45, 25 each if separate front break master cylinder with lines 25 stock tie rods 20 lower left a-arm 30, boot is damaged, and missing zirk fitting right lower a-arm 35 stock red shocks, one is missing bottom bushing, i have no idea what type of shape they in give me 10 and cover shipping and their yours stock bumper 15

How much for just the front rims and front tires. Shipping to 79928

id like the nerf and bumper if still available, please pm me

Any onenput kfx450r shocks on a banshee. I am swapping to Yfz front end and can get a good deal on kfx450r shocks. I just want to make sure they'd work?