Wheelman Chassis

hey how much would shipping be to 48180 michigan thanks?

intrested, would these be to much for a 4 mil cub making 100 hp,12 over arm, and 260 lb rider? i ride at silver lake michigan, its all flat drags in the weter sand in the low spots.. thanks

hey guys i forgot to say id like to trade for some nice plastics, or any drag parts, thanks

ill send pics tonight, im in michigan just morth of toledo thanks

hey guys ive got a few things to sell not lookin to get rich just get rid of the stuff, nerf bars with blue net $40 plus ride bumber $35 plus ride motor is an 98 65.50mm bore fresh topend like 5 hours on it,ran great 145 psi in both cyl. boysen reeds,stock carbs with tors removed 240 mains 120 pilots. mail me for more info its complete drop in and go,shifter ,kicker all of it.. 700 plus the ride reason for selling is i bought a 4mm cub from a guy on here thanks also have all stock suspesion parts of of bike tried to put pics up but no luck, mail me and ill send them to e-mail

i have a complete great running motor i just took out of my shee and swaped it for a 4 mil cub, it donesnt make 85 hp mor like 55-60. for 80 you need a cub or some good porting.. its complete with carbs and every thing 700 plus shipping if your intrested chris

hey guys so ive started my build and i need to know what size , #, ro, etc im gunna need.. heres the bike: 4mm cub w/ f.a.s.t cleanup port, vf3's,35mm alky carbs w/rdz bowls,1-5 dunable overide ,lockup, cpi oofs silanced. +3.5 inches forward on front tim stellar arms,+12 swinger.. i only drag race but this is my first banshee, i will be running at silver lake just flat drags for fun, im a 270 lb guy so take that in consideration. i want this thing to leave hard! also any gearing help would be great to.. thanks chris

hey dave just got the arms! they look great thanks for the good deal.. anyone dont be shy dave is a super guy to deal with and his parts are how hes says they are. i just want to ad that the quality of stellar parts looks to be awsome, these arms ar super light and built well..

pament sent thanks bansheefever. good seller

does he want to sell just the pipes?

id like pics to [email protected], also what kind of power does this thing make?

ill go 1800 on it if it comes with the carbs ready to go.. shipped to 48111 thanks

ok with that being said, say i get the 392 ported and switch to meth.how much would i be giving up to the cleanup port cub 4mil?

just a clean up port on the 392, so if i run a short rod on the 4 mil i can stay with the same cyl?

hey guys i have a 392 cub motor for my shee.. can i put a 4mil crank in it without changing the ports, can it even be done without changing the cyls? thanks

e-mail sent let my know if you got it thanks

yep thats me... no rust at all solid car,drop in a motor and trans and ign and race

hey guys i want to trade mustang roller for a banshee, message me for pics or info

thanks i think im getting the quad so i wont ride it much ill pull it apart and put a 4 mil and cyl on it just became a payin member love the site..

well thats not what i wanted to here isn not welded either????can anyone confirn the 200 psi a little?

hey banshee guys hey i was in talks with a few of my buddys on loading up and going to glamis......people who have been would it be worth it? i go to silver lake sand dunes all the time,just looking for that crazy dune trip. thanks

belleville mi here,just south of ann arbor

thanks for the welcome loco, ive seen you in alot of posts,thanks for the help..love the hole banshee group its like a family lol also my buddys bike is not a 4 mil stroker, it just has long rods,stock stroke. thanks with the description of the banshee im looking at,would tradeing a mustang that is worth 2500-3000 be a good trade i cant get my pics to post so .....but the bike looks good imo

the race will be your standard 300 ft race,will the banshee im looking at beat the other shee that my buddy has? thanks

hey guys im in the market to buy a banshee and ive come across one i can trade for a mustang i have. with that said i want to start a drag build with the banshee. my q is will the banshee in the form its in beat my yfz 450? here are the specs on them both: banshee The frame has been powder coated lime green pearl (powder coating done by QC Coatings). The front a-arms are aftermarket +2/+1 fully adjustable and powder coated silver vein. The swing arm is extended 6 inches. It has new (only one ride on them) rear Holeshots and I have a set of 10 paddle Extreme x paddles on Douglas reinforced wheels. The motor is stock stroke and 64.5mm bore. The jugs have been ported, has Vito's super stock pistons, Pro-design coolhead with 17cc domes (200+ PSI on compression gauge), Billet intakes, V-Force 3 reeds, 34mm Carbs with K&N's and outerwears, Billet coolant impeller, Heavy duty clutch, DMC Pipes, Laker plastics, Verde power sports seat, Renthal handlebars, billet thumb throttle. the yfz lightened frame,stock motor w the cam mod done,bored carb(42mm),k&n,venom pipe,dyna ign,on oxy fuel, lightened flywheel,6" over arm,lockup clutch,jj@a play axle,blue lables ,12 paddle extremes,and buffs up front, stock gearing. thanks guys hope the banshe will smoke the yfz... my buddy has a banshee with a stock stroke 4mm longrod,fmf fattys,cool head w/20cc domes,wiesco pro lites,stock carbs,with the tors still on it,pro flow intake and k&n,6"over arm and hauler paddles and my yfz gets him all the time by 3-4bikes even on pavement, and the guy can ride well. when we switch bikes,he beats me on my bike.. im 75 lbs more than him... thanks for the info guys