LT ROOKIE

Sold

1000.00

550 shipped I just purchased an 18mm DM

Any interested in a 14mm cheetah topend ported by Dan hull? Includes cylinder, head/domes, reeds, and chrome bb/bf pipes one out each side.

Any interested in a 14mm cheetah topend ported by Dan hull? Includes cylinder, head/domes, reeds, and chrome bb/bf pipes one out each side.

Ok, I'm going to buy a 14mm crank. My wife thinks I would make love to my quad over her if I could

Last offer, 625 shipped for the crank and cases. I keep the trans and clutch stuff

I used acid and about 100 long q tips to bring the numbers out. You have to keep going over the vin with the tips and it will slowly appear. Have pen and paper nearby to write the vin because it will fade away. It took be about an hour to get the vin to be legible.

The rod has ck 103 on them so i think it is 120, or 125 can someone confirm that

Little use. I purchased this about a month and a half ago and it took a month to get it. I though the guy stiffed me so i sold the topend. Now I have no use for it. The crank looks great and the threads are good. If the buyer is not satisfied I will refund the purchase. I like this site too much to wrong anyone.

Thanks

Obo

700 shipped

10mill banshee bottomend. Has a billet twister crank with trenches cases bored to 78mm, stock trans, and clutch asking 875.00. Cases has no chain wack but there is s small hole where they bored the inside of the cases

Let me know how your cheetah turns out, I'm doin.g the same thing. I have a set of 10 mill cases I'm setting up for a 14mill cheetah. I'm going to try redline racing. Just saving money for the straight cuts and billet basket

Have a set trenches for a 10mm crank with a 78mm bore. No chain wack

Trade drag ported 14mill cheetah topend for 10mill cheetah or DM topend. I have the matching shearer bb/bf/oof pipes

Ok gentlemen, I am going to use the cases and have them setup for the 14mm cheetah. The 10mill crank I will use later for a cub. Thanks for the interest in the parts but they are off the market now.

14mill cheetah cylinder drag ported by A&S Racing, head,domes, v3 reeds and beautiful chrome shearer bb/bfn oof pipes with silencers. Asking 1000.00 or will sell 10 mill bottomend with like new billet twister crank, perfect cases, stock trans, and stock clutch. Asking 900. Cases are trenches and has a 78mm bore. Call Mark for pics or info. I'm only selling one of these setups.

Situation setteled, I recieved my 10mill bottemend almost a month later. Too bad I sold my 10mm cheetah topend. Paypal does not cover the purchase but my bank does since they are linked together. Marty still doesn't pickup the phone, good thing the crank is in great condition or we might have a SITUATION

I'm a heavy guy on a budget. I have a good deal on a 14mm cheetah topend with pipes and crank so i might jump on that. I guess i can race the class that has the 650 cc limit. 800 for topend and pipes

Is the power difference worth the cost? I already have the cheetah cylinder,head,domes,and reeds. It needs to be plated and ported and needs pistons

I have a raw 10mm cheetah cylinder that I want to setup for 1/8 mile asphalt. What's the most HP I can get out of it on alky using 44 lectrons. Who should i send it to for the drag porting? I'm thinking about redline. All input will be appreciated. Should i sell the cylinder and do a 10mill DM?

Rc418 do you know this guy, maybe u can see what's up with him

I will file a dispute with paypal but i think they only cover you for purchahes with ebay. I think I have a better chance with bank of America since its Linked to my paypal.