slamed91si

ok will do and ill let you know if that works

i have took the carbs off and there fine no water in them. also changed plugs had to pop start and still the same right cylender runs and the left back fires. i dont think the coil can be bad cause it runs on 1 cylender, can it still be bad ?? im thinking its the wire or the boot can you remove the wires?? i dont want to keep pulling on them if they dont come out.

if they are all worn out beat a flat head screw driver in between the bearing and swing arm and pry up and bend it till it comes out or use a die grinder and cut it out

ok here goes was riding yesterday all day like 5 hrs no problems then hit a big mudd hole and now my bike is only running on one cylender. i had my buddy pull me to try to pop start the bike and the left cylender back fires and the right one is fine i have tested the wires from the coil to the clear plug in the rear and thats all good also tested the coil for cont. and i think thats good. also took the carb and reeds off to look for water and there was none not sure what else to try??? i tryed to get the wires out of the coil and broke the keeper tabs off and still cant get the wires out whats next????????