Banshee23!

the parking brake stuff is still attached to the handlebars, but the cable is removed. I pulled the rubber boot back and there was a busted cable tie that was used to hold the parking brake in the off position. It ran just fine after that. What is the best way to remove that stuff and prevent it from heppening? my bashee still has all the lights and stock handlebar controls.

Video if issue is posted on youtube now. Please check it out. Thanks. http://www.youtube.com/watch?v=_7GqHQ_GZRU

TORS system removed. connectors still there but not plugged in to anything. parking brake is removed.

All, I just bought a 2000 banshee and it will only idle. Guy claims it ran fine before I bought it. Starts right up and idles, but giving it gas doesn't do anything. It only makes a weird noise, like the timing is off. Almost coughing or something. Can't describe. I have pulled the carbs and cleaned them. pilot jet is 52, main jet 158. Keihin 29pwk, vforce reeds, billit crossover intake, NOSS head, T6 pipe/silencers, k&n clamp on filters. Any ideas? I could shoot a video on my phone and email if that would help. I am at a loss. Thanks.

All, I just bought a 2000 banshee and it will only idle. Guy claims it ran fine before I bought it. Starts right up and idles, but giving it gas doesn't do anything. It only makes a weird noise, like the timing is off. Almost coughing or something. Can't describe. I have pulled the carbs and cleaned them. pilot jet is 52, main jet 158. Keihin 29pwk, vforce reeds, billit crossover intake, NOSS head, T6 pipe/silencers, k&n clamp on filters. Any ideas? I could shoot a video on my phone and email if that would help. I am at a loss. Thanks.