SD1026
-
Posts
577 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by SD1026
-
-
lookinf for the handle bar on off light switch.have a 2001 app.if so howmuch shipped to 10306
-
-
-
I will try and get some pics up tomorrow morning.
ok great
-
Post some pics so I can see what I would like to buy.
-
I am in need of the on off switch
-
I had my shocks redone by works also. When I got them they seemed high and stiff maxing out the ball joints but I rode on them any way and they did change after riding. So test them out break them in and go from there. Do you have rezzies on these shocks.
-
I am looking for some pro circuit forestry approved silencers. I have a set of 304s that are in very good shape that I would trade. They have been painted black Thanks
have some pics might be interested in a trade
-
Can you get me some pics and what your looking to get for them.
-
Trade complete. Bhq is the best
-
Like it says need pics and prices shipped to 10306.
-
Trade pending.
-
Not happy about the ez drain as sonn as those pics were post bam gone like a paid hooker.
-
Are you running the pipes now on a stock motor??? What jets u have in there.
-
I would split the cases and really clean everything up but maybe you will get lucky and the whole half will come out.
-
Do you have pics of the ez drain cover.
-
For carbs cable airbox and filters 280 shipped. Just carbs and cable 160 shipped. Air box proflow adapter and 5 filters and outerwears 130 shipped.
-
Just got one from direct drive it was 360 to my door all said and done. Need a water and clutch gasket kicker seal and if you want a new berring.
-
Just got one from direct drive it was 360 to my door all said and done. Need a water and cluctch gasket kicker seal and if you want a new berring.
-
Take a can of cheap ass spray paint, give a little shot of it down in the grip so it lightly coats the inside of it - (this is two fold it will lube it a bit to get it down on the bar & then dry so the grip wont move) - now put the grip on and go get a beer, once the paint dries she's done.
I discovered this one night after several cold ones with the boys in the garage, it worked great and have been doing it for the past 3 race seasons. All of our race bikes (Yamaha & KTM) have ProTaper bars and we're sponsored by Progrip so - yeah, tend to use their grips. - not sure about other brands of bars & grips with this method but its on point and never had any issues with them slipping on our racers.
Few tips on this method;
- Now don't be pissin' around sniffin the shit and let it dry up, all it takes is a quick shot - jam your finger in the grip run it around the inside once to ensure an even coat and get it on with a quickness.
-Don't get all excited you learned a cool new trick and load the damn grip up so bad it's dripping and you have shit running all over your hand like a window licker with an ice cream cone in July.
-Hold the spray tip right at the hole of the grip, don't be thinking your some sort of professional painter halfway through a case of BudLight and try to hold the rattle can 12inches away from the grip. Remember guys like Chip Foose paint for a living - you have a 99cent can of rustoleum & just wanna ride your Banshee.
-Go clean your nasty ass colored finger off with some of that orange shop soap before you pick your nose and think that hottie is staring at you cause your a chic magnet with badass grips on your quad. - NO, she's wondering why you have flat black primer war paint on your face.....
You def discovered this one on accident lmao.
-
Take a can of cheap ass spray paint, give a little shot of it down in the grip so it lightly coats the inside of it - (this is two fold it will lube it a bit to get it down on the bar & then dry so the grip wont move) - now put the grip on and go get a beer, once the paint dries she's done.
I discovered this one night after several cold ones with the boys in the garage, it worked great and have been doing it for the past 3 race seasons. All of our race bikes (Yamaha & KTM) have ProTaper bars and we're sponsored by Progrip so - yeah, tend to use their grips. - not sure about other brands of bars & grips with this method but its on point and never had any issues with them slipping on our racers.
Few tips on this method;
- Now don't be pissin' around sniffin the shit and let it dry up, all it takes is a quick shot - jam your finger in the grip run it around the inside once to ensure an even coat and get it on with a quickness.
-Don't get all excited you learned a cool new trick and load the damn grip up so bad it's dripping and you have shit running all over your hand like a window licker with an ice cream cone in July.
-Hold the spray tip right at the hole of the grip, don't be thinking your some sort of professional painter halfway through a case of BudLight and try to hold the rattle can 12inches away from the grip. Remember guys like Chip Foose paint for a living - you have a 99cent can of rustoleum & just wanna ride your Banshee.
-Go clean your nasty ass colored finger off with some of that orange shop soap before you pick your nose and think that hottie is staring at you cause your a chic magnet with badass grips on your quad. - NO, she's wondering why you have flat black primer war paint on your face.....
You def discovered this one on accident lmao.
-
Take a can of cheap ass spray paint, give a little shot of it down in the grip so it lightly coats the inside of it - (this is two fold it will lube it a bit to get it down on the bar & then dry so the grip wont move) - now put the grip on and go get a beer, once the paint dries she's done.
I discovered this one night after several cold ones with the boys in the garage, it worked great and have been doing it for the past 3 race seasons. All of our race bikes (Yamaha & KTM) have ProTaper bars and we're sponsored by Progrip so - yeah, tend to use their grips. - not sure about other brands of bars & grips with this method but its on point and never had any issues with them slipping on our racers.
Few tips on this method;
- Now don't be pissin' around sniffin the shit and let it dry up, all it takes is a quick shot - jam your finger in the grip run it around the inside once to ensure an even coat and get it on with a quickness.
-Don't get all excited you learned a cool new trick and load the damn grip up so bad it's dripping and you have shit running all over your hand like a window licker with an ice cream cone in July.
-Hold the spray tip right at the hole of the grip, don't be thinking your some sort of professional painter halfway through a case of BudLight and try to hold the rattle can 12inches away from the grip. Remember guys like Chip Foose paint for a living - you have a 99cent can of rustoleum & just wanna ride your Banshee.
-Go clean your nasty ass colored finger off with some of that orange shop soap before you pick your nose and think that hottie is staring at you cause your a chic magnet with badass grips on your quad. - NO, she's wondering why you have flat black primer war paint on your face.....
You def discover this one on accident lmao.
-
Depending on ypur elevation you might wanna try a 25 piolet have you messed with the air screw.did you try 2.5 turns out to see if it got better or worse. If it gets better 2.5turns out drop the piolet if it get better at a half turn out bump the piolet to a 30 but check to see if your needle clip is in the middlle. Needle clip should be in the middle.
-
13/42 trails/coal hills love the jump i get on people just enough to get in front for the trail ride
doesn't 13/42 brig you back to stock gearing? what size rear tires you running????? how does the gearing make your bike perform ???
EVERY BANSHEE PART - CHEAPER THAN DEALERSHIP
in For Sale - Parts & Accessories
Posted
Looking for a frame powdercoated orange or candy blue with papers in awsome shape. No stripped threads a nice straight frame? Price and pics shipped to 10306