SD1026
-
Posts
577 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by SD1026
-
-
i always leave the needle in the middle . then i get my pilots close and work on my main jet. also test the vaccum on each carb make sure its the same .
-
how much for the a-arms shocks and front break lines????? what are the shocks set up for ???
-
bump for a great deal
-
-
-
-
just took off a set of DG pipes and silencer off a bike i bought they are in decent condition cleaned some rust off the silencers no dents or dings except for near the gas valve for clearance anyone interested. will take pics tonight .
-
when you hold them up to the light do u see spots or any light comming thru them ??
-
have a banshee thatis 80 over mx port great bottom 18cc domes 182 psi and 28mm carbs was wondering what a 30mm carb could do . looking at a d slide carb any opinions
-
2nd dibbs if he falls through i want em
pics of the cases???????
-
it holds the key also?
is that one the one thast holds the key?
-
Ok so 18cc domes and .80 over vitos hemi cool head stock crank. What should my compression be at? Have the top end off debating if I should hone and rings.
-
-
hey i have an 07 shee with fmf gold series pipes but i need more power. i wouldnt mind some more bottom end for the trails, any ideas?
if your looking for more bottom end u can go with a 2 in 1 carb it gives real good bottom and mid rang in trails and good throttle response. i have a brand new trinity setup if ur interested
-
well i want to put this 2 into 1 on and i need new o rings for the manifold. who thinks reed gaskets will work?? i have new ones i can put on i think they will work just fine.short term fix I would say yea but long term doubt it.
let me know
josh
-
1. You need to turn your caps off. Everyone thinks your yelling at them.
2. You still didn't answer all my questions, you forgot a major component called "Pipes".
Typically VF3 cages only make a bigger diference than replacement reeds on mid-top built motors.
sorry about the caps i have dg pipes but have plans on putting procurcuit platinum.
-
I have some FMF ram valves with FMF power reeds Im asking $12 for. One reed needs replaced...replacement reeds are $36.00. The cages work with stock intake boots. This setup was awesome and a big improvement over stock. I scored some rad valves for $20 tho
YES MY BIKE IS PORTED BUT I HAVE NO IDEA WHAT TYPE OF PORT OR DOME SIZE. THE COMPRESSION IS AT 182 AND HAD A TRINITY 2 IN 1 BUT I TOOK IT OFF AND PUT STOCK CARBS ON. THE BIKE HAS MAJOR BOTTOM END SO I THINK IT IS A MX PORT DEF NOT A DRAG PORT. THE KID I BOUGHT IT FROM SAID HE THINKS DUNCAIN DID THE PORT .HE WAS UNSURE DUE TO NOT ASKING WHAT WAS DONE WHEN HE GOT IT. I HAVE A VITOS COOL HEAD ALSO. SO I WAS WONDERING IF I USE THE CAGES I HAVE WITH CARBON FIBER REEDS OR GO WITH THE V3'S. I DO ALOT OF TRAILS AND DUNES TWICE A YEAR HOPFULLY BUT THE FOUR STROKE ALSO COMES OUT FOR THE DUNES.
-
have you gone over your whole harness all connections i had the same problem on two banshees where the wirefrom the stator to the cdi box was worn in the back of the bike near the plug a little giving on and off connection . firt bike was the green wir second was the red. also u might have a cracked gasket from friction i have also seen this in glamis.
-
looking to get some reeds !!! my buddy said to look into carbon fiber reeds vs v force 3 reeds any thoughts or experiances??????
-
HOW MUCH FOR THE PROCURCUITS WHAT KIND ARE THEY????
-
i wouldnt trade my banshee for anything i like to hold on for dear life. i went from four stroke to two stroke and haven't looked back.
-
I have a 99 and won't start unless I sprayair in card overflow. once it starts runs perfect just won't hold idle. any feedback is appreciated thanks.
I heard that if ur bike idols for 5 min your piolet is good try a larger piolet jet. I'm at sea level and have 5 1/2 turns out on my idol screw. Rinnin stock carbs
-
lookin to trade a brand new 2 in one for a perfect set of procurcuit platnium pipes and silencer . wacko 2000 posed pics in the for sale section.
-
how much for the front shocks?
06 raptor parts
in For Sale - Non Banshee Related
Posted
06 raptor stock swingarm 100.00 . also have the stock front shocks with a/c bumper 75.00