robert0762

Trying to get a estimate on cost to ship uncut fenders from md to canada. Post office says its too big to mail. Anyone ever ship to or from canada? Who should I use? Sent from my SCH-I535 using Tapatalk

Dirty. Pm me ur number ill go snap some more pics Sent from my SCH-I535 using Tapatalk

Front shocks and front fender only? 60 for shocks 60 for front and rear fenders uncut + shipping Sent from my SCH-I535 using Tapatalk

I have 39 pwk s withh upp intakes. The carbs are slightly angled with these intakes, Problem I am having is the overflows keep dumping fuel at the stock float adjustment. I made a fuel level tool out of a hollowed out bowl nut and a piece of hose. When I fill the bowls the fuel level is even with the top of bowl on the back side and a 1/4 in above on the front side. If I made it so the fuel level was even on the front side and 1/4 lower on the back side would this be sufficient. Also I have new needles and seats

Bump Sent from my SCH-I535 using Tapatalk

Ttt Sent from my SCH-I535 using Tapatalk

Bump Sent from my SCH-I535 using Tapatalk

Ttt Sent from my SCH-I535 using Tapatalk

Lost one connect rod bearing Sent from my SCH-I535 using Tapatalk

Ttt Sent from my SCH-I535 using Tapatalk

Ttt Obo Sent from my SCH-I535 using Tapatalk

pics are up

Cover is in good shape slight wear from kicker. Pics coming this evening. If you give me a number I can text the pic Sent from my SCH-I535 using Tapatalk

Pics will be up this evening. The mobile apps on my phone dont want to do as I day. Ill sit down at comp. And do them today Sent from my SCH-I535 using Tapatalk

Yes I have stator Sent from my SCH-I535 using Tapatalk

150 Sent from my SCH-I535 using Tapatalk

150 for frame Sent from my SCH-I535 using Tapatalk

Mostly stock. I have a whole banshee to part out. Fmf fatty pipes that have been painted green Everything else is stock. Cylinders measure 65 and need bored. Gotta pull the crank to check it out. Tranny is good. Cases have chain whack. Will have pics tomorrow Cases. 140 Tranny w/forks. 125 Lightened flywheel. Very little rattle 75 Stator. Sold Clutch basket gears hubs fibers pusher 75 Clutch cover 35 Clyinders 150 A arms + tierods 160 Spindles hubs brake calipers 100 Front shocks 60 Rear shock 75 Tank w petcock 60 Stem 40 Harness un cut 50 Cdi 50 Headlights 65 Blue fenders front rear uncut 60+ ship Blue front cut rear uncut 60+ ship Rear axle 50 Rear carrier 25 Anything else just hit me for pricing Shipping and paypal included in price Paypal is. [email protected] 443 617 3865 call or text w ?s Sent from my SCH-I535 using Tapatalk

Up for sale 10 mill super serval . Here is a link to the build. http://bansheehq.com/forums/index.php?showtopic=159106&page=1 Ten mill billit crank, 120 rods tz bearings, hinson sytaight cut gears w spring loaded basket, Direct drive lock up Fast clutch New inner and outer stock hubs Cascade pancake Pro mod tranny Chariot ultra high flow impellar and cover 10 mill super serv cylinders Chariot supercub head Fast custom cut gas domes Pwk 39 polished and powder coated Big bore shearer pipes Torch works rad Lonestar stem Renthal atv bars Asv levers Elka front shocks Laegers 2 1 a arms 450 dual piston front calipers Stock rear shock rebuilt by so cal suspension powerder coated and polished Powder coated frame Lonestar +6 swinger or laegers stock length ur choice Durablue x 33 axle and hubs Full bore plastics uncut Will post more pics later. Very low run time. Located in baltimore md. 6500 Text or call or pm or reply if interested 443 617 3865 Sent from my SCH-I535 using Tapatalk

100 for a arms Sent from my SCH-I535 using Tapatalk

Yes Sent from my SCH-I535 using Tapatalk

Ill take hubs rotors and chain guide. Send paypal info

Yes Sent from my SCH-I535 using Tapatalk

I will get some for you Sent from my SCH-I535 using Tapatalk