robert0762

Ttt Sent from my SCH-I535 using Tapatalk

it looks like it will but I have not put shocks on with wheels and sat it on the ground

So I have a set of custom axis shocks that measure 15.5 in. Banshee shocks are 14.5. So they must have come off of a raptor. I was told they were set up for 200 lb rider +2+1 banshee. Once I got around to putting them on I find out they are actually 15.5 they work but I dont want to run them. Im looking for banshee shocks to trade. or for sale 450 shipped Here is a bad picture . I will get some good ones tomorrow.

Yup. Im in the process of hacking it up. The only thing thats gonna be left is a wire for tether as a on off switch Sent from my SCH-I535 using Tapatalk

I ended up with a set of axis shocks that are supposed to be banshee +2+1 shocks. I go to put them on and just out of curiosity measure them and I get 15 1/2 in eye to eye. Can I run them on reg arms? Sent from my SCH-I535 using Tapatalk

Im not sure but the 120 is already a big pin so dont see why a longer rod would need mor trenching. Maybe some clearancing on the upper case. Sent from my SCH-I535 using Tapatalk

120 rods Sent from my SCH-I535 using Tapatalk

Motor is all done so now I can start putting the chassis together. Here is a link to the motor build. http://bansheehq.com/forums/index.php?showtopic=159106&page=1

Ill take throttle send me ur paypal info Sent from my SCH-I535 using Tapatalk

Stock location? Sent from my SCH-I535 using Tapatalk

There was a carrier in there but not the one I have Sent from my SCH-I535 using Tapatalk

ttt

I have what is claimed to be a lonestar swing arm. I bought it a few months back on egay. I go to put it on today and my carrier wont fit in. This is the carrier that came with the arm but it was not installed when I got it. I can spread the split section on the end to get it in but once it hits the solid section in the middle it will not go any further. The swing arm is about .04 in. smaller then the carrier. I even tried another carrier that I had laying around . That one didn't work either. HELP!!!!! Pics carrier measurement swingarm measurment

You can but its no worth it unless you get the carbs for free or you have junk carbs for parts. I have done it. Search my name I made a write up about it Sent from my SCH-I535 using Tapatalk

Bump Sent from my SCH-I535 using Tapatalk

here is this motor running

bump any offers

build pics http://s689.photobucket.com/user/robert0762/library/Banshee%20Rebuild current pic the white one is for sale

Stock cylinder 64.5 Hjr mx hardcore port Chariot head with pump gas domes and 50/50race gase domes custom cut by kevin Dual stage reeds boysen Magnum billet basket Fast clutch with new inner and outer hubs Chariot ultra high flow impellar and cove Billet intakes for 28 mm carbs Pwk 28s 1700 shipped Pics coming will not part out Sent from my SCH-I535 using Tapatalk

Some.builders trench by grinding them down with a porting tool. I sent a set to a sponsor here and they came back with the cases ported for the crank. Sent from my SCH-I535 using Tapatalk

you got any pics i have a * 6 lonestar swinger

Ive got a used swinger that the previous owner somehow has the bearings 4 inches inside the tube. Looking for some ideas on how to get them out Sent from my SCH-I535 using Tapatalk

Hinson magnum<br /><br />Sent from my SCH-I535 using Tapatalk<br /><br />